WCR 1000 T-Lock is coming

[FestitaMakool]

Finally, Festool has upgraded the base of its Workcenter.

I expect that there will be some orders for the base alone..:

[attachimg=1]

 

[FestitaMakool]

There’s obviously a SYS3 upgrade, now with the attic lid.
And a couple of bit sets to go, apparently a few options with driving bits and drill bits, also a combination of these two.

[attachimg=1]

 

[FestitaMakool]

And, a “new” CT 15?
It appears that it’s the hose that’s different along with accessories in the “SET” version.

It now says antistatic, so I guess that’s the new black hose, which also seems to have the new air bleed connector on the tool end:

[attachimg=1]

 

[Darius]

You think they will allow to order just the base?

Finally, Festool has upgraded the base of its Workcenter.

I expect that there will be some orders for the base alone..:

[attachimg=1]

 

[Chainring]

For anyone else wondering, the new WCR 1000 is 577253.

 

[simnick]

You are all welcome. I just bought 2 t-loc sys1 with attics, worried they would discontinue them, and they released new ones instead a week later. Although no 1/112 attics like before, so still useful. 137 would be a good height for a lot of tools with the attic, 112 with attic is really small inside.

 

[FestitaMakool]

I figure that most if not all are migrating to SYS3.
Here’s the heights:
You can also visit the German Festool page .de

[attachimg=1]

 

[FestitaMakool]

For those interested: New T-Lock base for WCR-1000

After ordering and receiving the new base as a spare part order, the new base fits happily to either:

* The new CT Mini/Midi - With optional handle (slightly tight fit against handle, but it works)
* The CT 26 and up, with T-Lock hose garage, and optional handle, good clearance.
* T-Lock systainer
* SYS3 systainer
* Classic systainer
* CT SYS

 

[Chainring]

BTW, I've had the new WCR 1000 for a month or two now. Super nice unit! It, of course, fits on my CT 48 AND it fits on my wife's CT MINI I, which was unexpected.