baycal94566
Member
- Joined
- Jan 15, 2014
- Messages
- 31
This chair is made from clear VTG western red cedar. I used all darker pieces and arranged them to showcase the natural beauty of this wood. The entire chair was constructed using the Festool domino system with no mechanical fasteners employed. When the chair was complete and sanded to 220, 4 coats of General Finishes exterior 450 semi-gloss were applied via hvlp.
At first the thought of putting each individual tenon into a matching mortise for each slat (4 mortises for each piece that’s 120 mortises just for the seat and backrest, that all have to be pretty much perfect and all of them are on a curve!) was a bit overwhelming but honestly after a little layout it wasn’t all that tough. I wanted to see how far I could push the domino and it passed with flying colors.[attachimg=1][attachimg=2][attachimg=3][attachimg=4]
At first the thought of putting each individual tenon into a matching mortise for each slat (4 mortises for each piece that’s 120 mortises just for the seat and backrest, that all have to be pretty much perfect and all of them are on a curve!) was a bit overwhelming but honestly after a little layout it wasn’t all that tough. I wanted to see how far I could push the domino and it passed with flying colors.[attachimg=1][attachimg=2][attachimg=3][attachimg=4]