What Festool Did You buy Today?

[DynaGlide]

Just ordered a Vacuum Sys with the Accessory kit and the MFT clamp.

Ordered it from Beaver Industrial Supply, Thought Id give them a try

Attaboy.

 

[rst]

Beaver is great, I never bought any Festool from them but they were my go to for Fein.  They were the only source I found for Fein dust extraction accessory for the Supercut, which should also fit the Vecturo.

 

[sancho57]

When I order on line I used to go to Tom B (RIP) then Aldo (outta business) and Bob (outta business) so I thought Id give Beaver a shot based on Bobs recommendation. Bob dont give those out unless they deserve it.  So I thought what the hay. Ive been PMing Alan and hes been very responsive to my PMs. I Pm him usually after hours and I have his reply in the morning which is great considering the time difference Im PST so he's either 2 or 3 hrs ahead of me.

But so far so good.  If all goes well, they'll be getting my online business and my recommendation to some other tool buying fools like me  [big grin].

 

[Jiggy Joiner]

Great things come in small packages, so I bought these but, they were empty?



Just kidding, this arrived today, It’s 110 volt brother is arriving tomorrow:









Nice machines, very pleased.  [thumbs up]

 

[Jim_in_PA]

Bought a pretty full set of the Centrotec drill bits from a fellow  woodworker...hardly used. It will be nice to have them in my cabinet as I don't have more than a very few other metric bits and I'm very fond of the Centrotec system.

 

[pettyconstruction]

I online ordered a 5m smooth hose .
Tool nut. I hate the old ,ribbed hose.
I got a Tanos Sys-cart too.

I also ordered a TSO rail square thingy ,
I’ll post the pics when they arrive .
Charlie

Sent from my iPad using Tapatalk Pro

 

[neverenoughrum]

I bought a SYSROCK and it's playing some good music in the shop. Had a BOSE in there but wanted the radio feature.

My son just got a TS75 and an FS 2700 so I went to his shop to play with it. A lot bigger and much more power then my TS55. Nice saw.

Not sure why the depth gage on the TS 75 does not include the track depth, why would anyone use this saw without a track?

 

[Cheese]

Purchased the DF 500 Knockown connectors from Woodcraft for a 10' long series of cabinets that will be placed in the knee wall of the loft. The connectors will NOT be used to hold the cabinets together but to secure the face fames to the front.

[attachimg=1]

[attachimg=2]

Each drawer will have LED lighting that automatically turns on and off.

[attachimg=3]

 

[sancho57]

My Boxes from Beaver Atools showed up. The cardboard boxes looked like they were pretty beat up. When I opened them there was a lot of bubble wrap that protected the tools and systainers. So let see Beaver is what Missouri (I think) I ordered Monday Afternoon and received them on Friday early afternoon. So thats pretty fast delivery and service. Alan also threw in a Festool Hat. though Im not a big bling guy. Ill put it with the other festool stuff I collected, A festool lorry and mini cooper , festool key chain, and festool folding rule. I got the festool bags, a beach towel , soccer balls etc. But havent hung them up for display for obvious reasons.

 

[rst]

I bought the Centrotec Pilotless Countersink, D5-15mm & Centrotec 495128 HSS twist drill bit set D3-10 CE/10 To put in with my CXS. Trying to decide if I want to transfer the drill and accessories into a Sys drawer unit.  I have my Milwaukee 18 impact, grinder and 3/8" driver in one with an attic lid...sure wish the attic lid was available separately as I really don't need another sys II.

 

[dltflt]

I’m pretty sure the attic lid is available separate. I think I remember [member=48572]Shane Holland[/member] saying that Tool it carried them.

 

[Shane Holland]

I’m pretty sure the attic lid is available separate. I think I remember [member=48572]Shane Holland[/member] saying that Tool it carried them.

The attic lid is no longer available unfortunately.

 

[MrToolJunkie]

Got the ETS EC 150/5 yesterday - awesome sander!

 

[dltflt]

I’m pretty sure the attic lid is available separate. I think I remember [member=48572]Shane Holland[/member] saying that Tool it carried them.

The attic lid is no longer available unfortunately.

That explains why I could not find it. That’s to bad.

 

[Cheese]

That explains why I could not find it. That’s to bad.

I believe they can still be ordered directly from Festool parts. They're expensive though $58.42. It's a better deal just to order the Systainer with an attic lid installed.

 

[dltflt]

That explains why I could not find it. That’s to bad.

I believe they can still be ordered directly from Festool parts. They're expensive though $58.42. It's a better deal just to order the Systainer with an attic lid installed.

My plan was to put an attic lid on a Sys combi for all my drills and drill bits. I probably would have had some space left over.

 

[DynaGlide]

Just picked up a second (or third?) hand WCR 1000. After using one at the Festool class last week I realized how nice they are and sure enough a member here posted one on CL the day I got back.

 

[sancho57]

Though not a festool, but works very well with festools, I ordered WP OTT paolini rule. I got the aluminun set combo (metric/imperial)

 

[akatar]

Well, i bought my self a Festool vecturo 18 volt, it's already for sale in the netherlands

 

[sancho57]

[member=65062]DynaGlide[/member]

Yea bud I got a WC. They do come in handy. What I like about them is the ability to customize it.

I ordered dome replacement dominos for the 500, a bag of the largest ones 10x 50 and the ones for 3/4 ply 5/30.

I also ordered another vacuum clamp for the 2nd head of my vac system.