125 pad on a RO150

[HowardH]

Will a 125 pad interchange on the 150 sander?  I want to put some 125 polishing sponges on it.

 

[Jim_in_PA]

Unfortunately, no. There's no compatibility in that direction.

 

[HowardH]

I figured as much.  That way you need to have one of each! 

 

[Cheese]

No swap ability on the RO front...only on the ETS EC front. [smile]

 

[AlexThePalex]

What's keeping you from cutting a 150 pad down to 125?  [wink]

Though it might be easier to simply use 150 mm sponges on it.

 

[HowardH]

for aftermarket accessories, pads, etc., there is a much better variety of 125mm pads vs. 150.  Seemed like it could be an easy fix. 

 

[Bertotti]

I think I would just cut down an older 150 mm disc then use the 125 mm pads on it.

 

[flair woodworks]

Will a 125 pad interchange on the 150 sander?  I want to put some 125 polishing sponges on it.

Unless you are polishing into corners, just put the 125mm sponges in the 150mm pad. I don’t think cutting down a pad is a very good idea.

 

[rvieceli]

[member=396]HowardH[/member] Try this vendor. there are a lot pads  [eek]

6.5 inch for 6 inch backer plate
https://www.autopia-carcare.com/buffing-polishing-pads.html

25% off coupon ends TODAY at 11:59 am EST free shipping on $95 plus

Ron