49 holes MULTI-JETSTREAM 2 available from September 2017

[Martin B]

Searching for "MULTI-JETSTREAM 2" or "MJ2" here returns no hits, so I thought I'd post about it.

MULTI-JETSTREAM 2 with 49 holes for D150 will be introduced from September according to the German press release.

Here is a list - likely incomplete - of the new items I've been able to find:
Backing plates
M8 (ETS/LEX)
• 202458 Festool M8 Sanding Pad ST-STF D150 / MJ2-M8-W-HT FUSION-TEC (black, soft)
• 202459 Festool M8 Sanding Pad ST-STF D150 / MJ2-M8-SW FUSION-TEC (gray, super-soft)
• 202460 Festool M8 Sanding Pad ST-STF D150 / MJ2-M8-H-HT FUSION-TEC (blue, hard)
FastFix (ROTEX)
• 202461 Festool FastFix Sanding Pad ST-STF D150 / MJ2-FX-W-HT (black, soft)
• 202462 Festool FastFix Sanding Pad ST-STF D150 / MJ2-FX-SW (gray, super-soft)
• 202463 Festool FastFix Sanding Pad ST-STF D150 / MJ2-FX-H-HT (blue, hard)
Interface pads
• 203348 Festool Interface-Pad IP-STF D150/MJ2-5/2 (5 mm)
• 203351 Festool Interface-Pad IP-STF D150/MJ2-15/1 (15 mm)
I believe we currently "only" have the 15 mm 496647.
Abrasives
Brilliant 2
- 10 discs
• 575137 STF D150/48 P40 BR2/10
• 575138 STF D150/48 P60 BR2/10
• 575139 STF D150/48 P80 BR2/10
• 575140 STF D150/48 P120 BR2/10
• 575141 STF D150/48 P180 BR2/10
• 575142 STF D150/48 P320 BR2/10
- 50 or 100 discs
• 575143 STF D150/48 P40 BR2/50
• 575144 STF D150/48 P60 BR2/50
• 575145 STF D150/48 P80 BR2/50
• 575146 STF D150/48 P100 BR2/100
• 575147 STF D150/48 P120 BR2/100
• 575148 STF D150/48 P150 BR2/100
• 575149 STF D150/48 P180 BR2/100
• 575150 STF D150/48 P220 BR2/100
• 575151 STF D150/48 P240 BR2/100
• 575152 STF D150/48 P320 BR2/100
• 575153 STF D150/48 P400 BR2/100
Granat
- 10 discs
• 575154 STF D150/48 P40 GR/10
• 575155 STF D150/48 P60 GR/10
• 575156 STF D150/48 P80 GR/10
• 575157 STF D150/48 P120 GR/10
• 575158 STF D150/48 P180 GR/10
• 575159 STF D150/48 P320 GR/10
- 50 or 100 discs:
• 575160 STF D150/48 P40 GR/50
• 575161 STF D150/48 P60 GR/50
• 575162 STF D150/48 P80 GR/50
• 575163 STF D150/48 P100 GR/100
• 575164 STF D150/48 P120 GR/100
• 575165 STF D150/48 P150 GR/100
• 575166 STF D150/48 P180 GR/100
• 575167 STF D150/48 P220 GR/100
• 575168 STF D150/48 P240 GR/50
• 575169 STF D150/48 P280 GR/50
• 575170 STF D150/48 P320 GR/50
• 575171 STF D150/48 P360 GR/50
• 575172 STF D150/48 P400 GR/50
• 575173 STF D150/48 P500 GR/50
• 575174 STF D150/48 P800 GR/50
• 575175 STF D150/48 P1000 GR/50
• 575176 STF D150/48 P1200 GR/50
• 575177 STF D150/48 P1500 GR/50
Rubin 2
- 10 discs
• 575178 STF D150/48 P40 RU2/10
• 575179 STF D150/48 P60 RU2/10
• 575180 STF D150/48 P80 RU2/10
• 575181 STF D150/48 P100 RU2/10
• 575182 STF D150/48 P120 RU2/10
• 575183 STF D150/48 P150 RU2/10
• 575184 STF D150/48 P180 RU2/10
• 575185 STF D150/48 P220 RU2/10
- 50 discs
• 575186 STF D150/48 P40 RU2/50
• 575187 STF D150/48 P60 RU2/50
• 575188 STF D150/48 P80 RU2/50
• 575189 STF D150/48 P100 RU2/50
• 575190 STF D150/48 P120 RU2/50
• 575191 STF D150/48 P150 RU2/50
• 575192 STF D150/48 P180 RU2/50
• 575193 STF D150/48 P220 RU2/50
Saphir, 25 discs
• 575194 STF-D150/48 P24 SA/25
• 575195 STF-D150/48 P36 SA/25
• 575196 STF-D150/48 P50 SA/25
• 575197 STF-D150/48 P80 SA/25

Regards,
Martin

 

[ear3]

Thanks for posting.  It will take a while for me to run through my current abrasives stock, but depending upon the new pad prices, this looks like it will be a good upgrade.

 

[BJM9818]

The current RO150 pad is pretty good. While I like this new concept I hope they decide to keep the current pad as well. Striping paint off an old uneven surface I always catch something on one of the current holes which tears up the paper. This is an invitation to destruction of paper and backing pad for anything less than smooth new wood.

 

[nickao]

The current RO150 pad is pretty good. While I like this new concept I hope they decide to keep the current pad as well. Striping paint off an old uneven surface I always catch something on one of the current holes which tears up the paper. This is an invitation to destruction of paper and backing pad for anything less than smooth new wood.

What paper are you using?

I use Saphir for that type work and I have never had a piece rip. Saphir is tough paper, especially the lower grits.

 

[BJM9818]

It usually rips when it gets caught on a nail, splintered wood or some other raised unforeseen item. Again I beat the crap out of my Rotex.

 

[Stone Message]

Here is a very short clip of the new pad being used on plasterboard.


If you look closely you can see how the dust that would normally escape from the edge is pulled back in.

Forgive the intro - it was just a bit of fun.

Peter

 

[ben_r_]

Anyone upgraded to the Multi-Jetstream 2 pads? How could they really have improved on what is already the best RO sanding dust collection on the market?! Im wondering if I should pick them up to upgrade the old ones on my ETS EC 150/3. Seems like going forward all the sanding discs will be the new Multi-Jetstream 2 style and while I realize the older discs will still work, I just cant imagine the new design could really leave any less dust behind.

 

[Stone Message]

Anyone upgraded to the Multi-Jetstream 2 pads? How could they really have improved on what is already the best RO sanding dust collection on the market?! Im wondering if I should pick them up to upgrade the old ones on my ETS EC 150/3. Seems like going forward all the sanding discs will be the new Multi-Jetstream 2 style and while I realize the older discs will still work, I just cant imagine the new design could really leave any less dust behind.

Hi Ben

The new discs are amazing - hence me posting the video. I have not converted yet as I have a large stock of various grits and need to work my way through. It really is worth doing though as the improved efficiency is easy to spot.

Peter