5mm cutter for the Domino XL

[jacko9]

I just received email from Seneca Woodworking that they are now offering a 5mm cutter for the Domino 700 XL.  I already have the 6mm cutter for the XL which I use for through tenons and the 5mm cutter will be a great addition for those who don't also own the Domino 500.

http://us4.campaign-archive1.com/?u=547c699117f4095e38fc0a6ce&id=95a043b8cd&e=54289dc7a1

Jack

 

[mo siopa]

I have the DF700 bought Seneca's RTS-500 adapter to use all of the DF500 bits.  I've tried the 4 and 5mm bits (along with the Domi-shims) out recently with perfect results. 

 

[Carl Prentiss]

I've so far resisted these as I'm afraid I'd try to set the tenon flush and wind up setting it too deep. I force myself to cut shallow and trim with a flush cut saw. I'll probably buy one if I have to do a beefier joint.

 

[jacko9]

I've so far resisted these as I'm afraid I'd try to set the tenon flush and wind up setting it too deep. I force myself to cut shallow and trim with a flush cut saw. I'll probably buy one if I have to do a beefier joint.

I double check the depth of the domino hole and use a domino tendon that will "softly" bottom out and trim with a Japanese pull saw.  The joints look very nice and Sipo in white oak came out looking very classy.

Jack