5mm cutter for the Domino XL

I have the DF700 bought Seneca's RTS-500 adapter to use all of the DF500 bits.  I've tried the 4 and 5mm bits (along with the Domi-shims) out recently with perfect results. 
 
I've so far resisted these as I'm afraid I'd try to set the tenon flush and wind up setting it too deep. I force myself to cut shallow and trim with a flush cut saw. I'll probably buy one if I have to do a beefier joint.
 
Charlie Mac said:
I've so far resisted these as I'm afraid I'd try to set the tenon flush and wind up setting it too deep. I force myself to cut shallow and trim with a flush cut saw. I'll probably buy one if I have to do a beefier joint.

I double check the depth of the domino hole and use a domino tendon that will "softly" bottom out and trim with a Japanese pull saw.  The joints look very nice and Sipo in white oak came out looking very classy.

Jack
 
Back
Top