Aluminum blade for Kapex120

BJM9818

Member
Joined
Feb 17, 2011
Messages
247
I am installing glass railings in my new house. I have a bunch of CR Lawrence extremely beefy aluminum shoe tracks that will hold the 9/16” glass panels in place at the floor. I need to make very accurate cuts in the base shoe $760/10’ piece and then the trim finish skins that are about the same price so can’t afford any screw ups.

I do have a Ellis1600 horizontal band saw which is great for cutting metal pieces I weld together but the angle guide isn’t quite as exact as I would like for this project.

I’m thinking of using my Kapex to make the cuts but these U Chanel pieces 1” or more thick.
IMG_5119.jpeg

Anybody have a blade recommendation for the Kapex. Will need to make 25+ cuts so probably burn through a few blades.

Finish product look just going with a satin black not stainless finish to look less commercial.

Thanks.

IMG_5114.jpeg
 
Get the Festool aluminum blade for the Kapex, it works really well. Let the saw do the work, there is a color chart on the Kapex for blade speed, their aluminum blade is blue banded.

If you don’t want to invest in the Festool blade make sure you get one with a negative hook.

Tom
 
Last edited:
Back
Top