Mismarked
Member
- Joined
- Oct 8, 2014
- Messages
- 139
Does anyone have experience using vapor corrosion inhibitors (VCIs), which are sometimes called anti-corrosion emitters, inside their Systainers. Basically it is either a piece of foam or a small packet infused with a volatile compound that is placed inside a closed container and emits a vapor inside the container that coats all metal surfaces and prevents rust. I live on the coast, and the girlfriend wants her closets back. This means moving my Systainers to the enclosed but not airtight garage. I would like to see if the VCI's work, but I obviously don't want to use something that will ruin any of the moving parts on the Festools inside, such as the motors or sliding parts on the OF1400, etc. I looked but did not see any posts on the FOG forum about VCIs. Any thoughts would be appreciated.