Box Van set up

[ericbuggeln]

It seems like no one on forums ever wants to show off their wheels or their shop. My shop is under remodel right now, so here is the box van as it stands today. I say that bc it is ever changing and before the end of the year a Kapex will be in the mix, so gotta leave room for that. The entire project is either hand me downs or leftovers from jobs. There are no cherry veneers over here. Mostly 2x construction with pocket screws, longer ones into the floor. Sheets go on the right side and have a tied down bungee set up that works for one or more. Works great when emptied to deliver built ins. I fit a condo kitchen cabs in here one time too. Space in middle is also good for demo material on remodels.

Let me know what you guys think and hit me up with some new ideas, Eric

Whos autograph is that?

 

[ericbuggeln]

14ft long 6 ft tall

 

[ericbuggeln]

Some primer spilled

 

[ericbuggeln]

I hope someone gets an idea from this

 

[ericbuggeln]

If someone could turn those pics around that would be awesome, thanks Eric

 

[honeydoman]

Nice set up

 

[Top Knot]

I saw you missed a spot to put something but when I went back to find out what picture it was from i couldn't find it...  [tongue] thats a chunk of stuff to fit in the back of a van...

 

[ericbuggeln]

Some of the things that come along on an as needed basis are Ridgid shopvac for demo, commercial hand truck to move appliances, TS 75, foam cutting table with four sawhorses and of course 16 footers fit, but you gotta slide it into the cab through the door. Eric

 

[peter halle]

If someone could turn those pics around that would be awesome, thanks Eric

I will rotate and post.  Bet you are using an iPad or iPhone for taking the picts.

Peter

 

[ericbuggeln]

Thanks Peter, its a Sony Cybershot thats the culprit, Eric

 

[peter halle]

Done - I think.  [big grin]

Peter