Biker Dude
Member
- Joined
- Mar 10, 2017
- Messages
- 1
Can anyone tell me the kerf thickness of the CSC-SYS battery powered mobile tablesaw? Are alternate blades available so I can choose the one that fits my needs? I am wanting to do kumiko grids. ?
CSC-SYS blade kerf measurement
- Thread starter Biker Dude
- Start date
jonnyrocket
Member
This is the Festool site for the CSC-SYS. If you scroll down to the accessories section, all of the festool blades and details are available for each of the compatible blades they offer.
But in general, this uses a 168mm Diameter blade, 1.8 mm Kerf, and 20 mm arbor bore.https://www.festool.com/products/sawing/table-saw/576820---csc-sys-50#TechnicalData
Also, here’s a cheat sheet off the back of the blade packaging. It list all the grind details for the available blade offerings.
[attachimg=1]
But in general, this uses a 168mm Diameter blade, 1.8 mm Kerf, and 20 mm arbor bore.https://www.festool.com/products/sawing/table-saw/576820---csc-sys-50#TechnicalData
Also, here’s a cheat sheet off the back of the blade packaging. It list all the grind details for the available blade offerings.
[attachimg=1]
