CT MIDI Red light

[Brev]

Hi all,

I'm hoping for some help troubleshooting an issue with my MIDI extractor. It is about 4 years old, and just out of warranty.

Recently the vac shut off during use and displayed a red light on the screen. I turned the vac off and then back on to restart and it works for a few minutes before turning off again and going red. The vac is producing suction, and turns on via auto start with a tool or manual, but continues to shut off on its own after a few minutes. When the vacuum turns itself off it will still send power to the tool.

I have emptied the bag, cleaned the filter, and tried plugging into various outlets to rule out the most obvious causes. I have also checked behind the control panel for any loose connections, frayed wires, or any other visual clues.

Has anyone had this issue with their extractor?

Thanks!

 

[rmhinden]

I did a quick web search and found this:

Why is the bottom LED on my Festool CT MIDI showing red?


Circuit breaker tripped.

Bob

 

[Brev]

I did a quick web search and found this:

Why is the bottom LED on my Festool CT MIDI showing red?


Circuit breaker tripped.

Bob

I should have mentioned that I have been doing this, but have continued to have this issue so I think something else is going on.

I can reset the circuit breaker (green on / off button) and the vac will run for a few more minutes before turning off and showing the red light again. I should add that it doesn't matter what tool is being used, or if the vacuum is being used in manual mode.

Anyone have this issue before?

 

[Coen]

I did a quick web search and found this:

Why is the bottom LED on my Festool CT MIDI showing red?


Circuit breaker tripped.

Bob

That is something completely different.