Custom Systainer Labels

[Charles959]

Seth,

Thank you.

The pdf files should be much more useful to me than PC-only software.

I remember thinking when I first had a few Systainers on a SYS-Cart, "From stone age to Star Trek in minutes".

 

[GPowers]

Any additions to this set of labels, like a makita grinder. 90mm sandpaper, laser level...

 

[gkaiseril]

If you download and install Adobe Reader XI you will be able to import image files of the type Jpeg, Png, Bmp, and Gif. So you can use your cell phone camera to take an image of your stuff and inset it into the label.

Reader XI has added the ability  to import an image file into a PDf form.  This is not possible with older versions of Reader.

 

[Df1k1]

Just found this and was exactly what I was looking for (MFT Accessories label).
Thanks for taking the time to post

 

[jdm5]

Resurrecting an old thread...thanks to [member=19698]mike68au[/member] for his work on these labels.  I wasn't feeling great today, so rather then spending time in the shop I worked on additional labels I had a need for.

These included:

Festool Domino 500 Guides
Festool Domino 500 Tenon Assortment
Festool Domino 700 Tenon Assortment
Festool ETS EC 150_3 Sander
Festool HL850 E Planer
Festool MFK700 Trim Router
Festool OF2200 Router Accessories
Festool RTS 400 EQ Sander
Festool VAC SYS Pads
Festool VAC SYS PUMP
Festool VAC SYS SE1
Festool VAC SYS SE2
Grex 23 ga pinner
Magswitch Featherboards
Mirka Deros 125mm Sander
Mirka Deros 150mm Sander
OF2200 Plunge Router
Omer Brad Nailer
Porter Cable Spindle Sander 121
Push Sticks (Bench Dog logo, I have a couple and the logo is cool)
Router Bits (Used the Whiteside logo because I primarily have/use them)
True Position Drill Guide

   

I'm attaching the PDF's here as well as making the PDF, Photoshop, and source images available from my Dropbox.  I want to stress I'm not a graphic artist - some are pretty good, some are eh, but you get what you pay for...

JDM5's Systainer Labels

Let me know if you find any mistakes or have feedback.

 

[neeleman]

Nice labels indeed.
But I don't think some of them can have two brandnames on it.
Like the Fein MM with the Festool logo beneath it.
It's Fein or Festool but not both.
Other labels don't have the Festool logo beneath.
Here's my Fein version also.

 

[Lou in DE]

Resurrecting an old thread...thanks to [member=19698]mike68au[/member] for his work on these labels.  I wasn't feeling great today, so rather then spending time in the shop I worked on additional labels I had a need for.

Thanks very much - these are great and I can use quite a few of them. It never occurred to me to put a nicer label on the Festool tool systainers but the original labels are kind of difficult to identify from a distance with older eyes  [embarassed].

Lou (kind of a label nut)

 

[waterloomarc]

I'm using the link above to the UK website for their PDF's. Can somebody tell me how to change the font size, or if it's even possible?

I'm on a Mac but downloaded the acrobat reader. I can change out the picture etc. but the default font is pretty small.

Thanks!

 

[nclemmons]

[member=53094]jdm5[/member] - thanks for sharing these.  They are excellent.  I've used many of them.

Do you have labels for any of the drills?  The CXS or T15 would both be welcome!

Also the 1010 Router!

neil

 

[jdm5]

[member=167]neilc[/member] here you go (now that I have the templates setup they are pretty quick).  I'm also keeping all of them in my Dropbox folder (much easier).  If anyone is aware of a Festool central file site let me know, happy to centralize them somewhere else.

1010
CXS
T15

 

[nclemmons]

Fantastic!  Thank you!

 

[jdm5]

Some additional labels

MFS 400 and 700
Lamello Cantex Ergo
Lamello Zeta P2
Bosch JS572EL

 

[jdm5]

Lamello Zeta P2
Zeta P2 Connectors

 

[swag]

Hello!

I missing these labels.
Thanks!

• T18 / 3 Li 3 Plus
• DWC 18-4500 SET
• ZH-SYS-PS 420
• CENTROTEC-Systainer SYS
• Hole Saw-Systainer
  

 

[jdm5]

T18 / 3 Li 3 Plus
DWC 18-4500 SET
ZH-SYS-PS 420
CENTROTEC-Systainer SYS

(I don't have any of these tools, let me know if these are the right images).

What do you mean hole saw systainer?  Just a picture of hole saws?  Does Festool make this?

 

[swag]

T18 / 3 Li 3 Plus
DWC 18-4500 SET
ZH-SYS-PS 420
CENTROTEC-Systainer SYS

(I don't have any of these tools, let me know if these are the right images).

What do you mean hole saw systainer?  Just a picture of hole saws?  Does Festool make this?

Looks perfect! thank you!

Sorry, i mean a Festool systainer with my random hole saws, like this

Is it possible to change some label something on my own ? Which program can i Use if I want to add my name somewhere in the label or something like that. I use Gimp (program) alot.
If i open it, something happends..

 

[jdm5]

Gimp can open the Photoshop files I've generated, and I've stored them all in my Dropbox:https://www.dropbox.com/sh/nl1rdr00qn55zhp/AADrezuRUzpBKzmH55IrOESSa?dl=0

I've not used Gimp but from what I read you should be able to modify them that way.

 

[Holmz]

[member=53094]jdm5[/member] - Thanks, you got most of the what I can use.
(Do you happen to have a DEROS one too?)

[member=19698]mike68au[/member] - Thanks M8

I have some DIY ones out of card stock with marker on them, but half the time they pop out.
Is there any special lamination deal? Or just bring them in and the lamination is standard?
Or do I need to say some specific "???" lamination (like heavy duty, or 10#)?

 

[jdm5]

Deros - yes look above in this thread

 

[Holmz]

Deros - yes look above in this thread

And I stumbled out and it already has one on each side... just with writing on clear.