Does Festool make a wider hose that will fit the CT 15?

good stuff guys, appreciate all the insights!

let me ask, if i were to simply attach a Ridgid hose to the vac would that negate the HEPA rating?

in other words, is there something special with a Festool-branded hose that enables the machine to be fully HEPA sealed? or is the hose interchangeable?
 
I think it's important to point out that Alex's example of treating the CT ruggedly is with switching out to the sponge filter.  Your CT's HEPA rating is only due to the original HEPA filter cartridge only.  Puncturing that or switching out to a sponge negates the rating regardless of which hose you use. 
 
woodferret said:
I think it's important to point out that Alex's example of treating the CT ruggedly is with switching out to the sponge filter.  Your CT's HEPA rating is only due to the original HEPA filter cartridge only.  Puncturing that or switching out to a sponge negates the rating regardless of which hose you use.
Click to expand...

i don't plan on touching the filter. i'm just curious if, by using a hose mfg by someone other than Festool (Ridgid, Bosch), i am negating the HEPA as well?

or is the hose not included/tested/rated anyway?
 
woodferret said:
I think it's important to point out that Alex's example of treating the CT ruggedly is with switching out to the sponge filter. 
Click to expand...

Well, I had to because I was sucking up water. With the dry filter in it you can suck up just as much bad stuff as you want, as long as it's not liquid. And using a vacuum bag with that, your vac itself stays a lot cleaner.
 
I've never heard of a HEPA rating for wet filters.

Why worry. Water is a filter by itself. I binds the dust particles like no man made filter does.
 
Alex said:
I've never heard of a HEPA rating for wet filters.

Why worry. Water is a filter by itself. I binds the dust particles like no man made filter does.
Click to expand...

is that true with lead? i don't know. any rrp professionals here?

at any rate, back to the hose question. what would be the reason for buying the $100+ Festool branded hose in lieu of the $20 Ridgid one? especially for my situation?

thanks!
 
thisvacuumsucks said:
i think the one that comes with the unit is 27/32? it's not wide enough to pick up some larger debris (i use my CT 15 a bit like a Shop Vac).

thanks.
Click to expand...
I use the 36mm hose on it with no issues. It's permanent attached to my Kapex.

Sent from my SM-T290 using Tapatalk

 
thisvacuumsucks said:
Alex said:
I've never heard of a HEPA rating for wet filters.

Why worry. Water is a filter by itself. I binds the dust particles like no man made filter does.
Click to expand...

is that true with lead? i don't know. any rrp professionals here?

at any rate, back to the hose question. what would be the reason for buying the $100+ Festool branded hose in lieu of the $20 Ridgid one? especially for my situation?

thanks!
Click to expand...

How can you be surprised the wet filter isn't Hepa? It's obvious by just looking at it.

Lead in pure form is heavy. It sinks in water.
 
You must log in or register to reply here.

Similar threads

teton176
One Vacuum to Rule Them All.....
2
Replies
39
Views
17K
Coen
C
S
Dust Extractor CLEANTEC CT 15 HEPA vs Dust Extractor CLEANTEC CT 15 E HEPA ?
Replies
0
Views
472
smorgasbord
S
onocoffee
Oneida Systainer and the CT MIDI I
Replies
0
Views
284
onocoffee
onocoffee
G
CT15 powerful enough for TS 55?
Replies
8
Views
590
makpacman
makpacman
A
Extending standard CT Midi hose (sorry!)
Replies
7
Views
498
Coen
C
Back
Top