Domino Connectors
- Thread starter sancho57
- Start date
GarryMartin
Member
- Joined
- Jun 11, 2011
- Messages
- 1,975
The Festool ones? Unfortunately not as they need the 14mm cutter.
I believe there was some cautious talk about Festool developing a range for the 500 dependent on the success and popularity of the 700 connectors.
As a side note, has the possibility of creating tenons that fit the wider settings for the 500 and 700 ever been discussed? A wider 14mm for the 700 wide setting would be sweet.
As a side note, has the possibility of creating tenons that fit the wider settings for the 500 and 700 ever been discussed? A wider 14mm for the 700 wide setting would be sweet.
Davidpepke
Member
- Joined
- Aug 20, 2014
- Messages
- 39
As it is now, it's an ideal reason to get the 700 to compliment my 500... But an offering for the 500 would be great for smaller furniture. Showed the connectors to my uncle who is a furnishing architect, and he instantly found several handfuls of uses for the connector, if it was offered in a smaller dimension. So, I hope that they will expand the range soon...
Sendt fra min ONE A2003 med Tapatalk
Sendt fra min ONE A2003 med Tapatalk
msnelling said:
... and a new video here:http://festoolownersgroup.com/festo...00-festool-tv-complete-series-here/?topicseen
Soss hinges require two plunge depths, 20mm for the main body and 6mm for the shoulders. As recommended elsewhere on this forum I used plastic tubing to limit the Domino 700 plunge depth to 15mm and then further reduced this down to 6mm with Traxxas spacers. I used a 12mm cutter to rout the 13mm width of the Soss hinge and placed a 1mm engineered plastic sheet under the plate as a shim for the extra width, I find this method more precise than making trial and error fine adjustments using the height gauge.
Although 13mm X 60mm Soss hinges are intended for material thicknesses between 16 and 18mm if you justify them to one side of 30mm stock they still function.
Although 13mm X 60mm Soss hinges are intended for material thicknesses between 16 and 18mm if you justify them to one side of 30mm stock they still function.
Now with images!
Soss hinges require two plunge depths, 20mm for the main body and 6mm for the shoulders. As recommended elsewhere on this forum I used plastic tubing to limit the Domino 700 plunge depth to 15mm and then further reduced this down to 6mm with Traxxas spacers. I used a 12mm cutter to rout the 13mm width of the Soss hinge and placed a 1mm engineered plastic sheet under the plate as a shim for the extra width, I find this method more precise than making trial and error fine adjustments using the height gauge.
Although 13mm X 60mm Soss hinges are intended for material thicknesses between 16 and 18mm if you justify them to one side of 30mm stock they still function.
Soss hinges require two plunge depths, 20mm for the main body and 6mm for the shoulders. As recommended elsewhere on this forum I used plastic tubing to limit the Domino 700 plunge depth to 15mm and then further reduced this down to 6mm with Traxxas spacers. I used a 12mm cutter to rout the 13mm width of the Soss hinge and placed a 1mm engineered plastic sheet under the plate as a shim for the extra width, I find this method more precise than making trial and error fine adjustments using the height gauge.
Although 13mm X 60mm Soss hinges are intended for material thicknesses between 16 and 18mm if you justify them to one side of 30mm stock they still function.
