Down with the old & Up with the new

[festal]

[member=44099]Cheese[/member]  Corrected. I believe I'm done what output do you want these in? DXF?

Let me know if you got any more napkins

 

[rvieceli]

Hey [member=44099]Cheese[/member] do you think those hole placements and sizes are the same across the product line? Or would have to keep checking the placements on each box.

Ron

 

[Cheese]

[member=44099]Cheese[/member]  Corrected. I believe I'm done what output do you want these in? DXF?

Let me know if you got any more napkins

Thanks a ton [member=71889]festal[/member]  [thumbs up] [thumbs up]

The .dxf file format is preferable.  [cool]

 

[festal]

[member=44099]Cheese[/member]  Corrected. I believe I'm done what output do you want these in? DXF?

Let me know if you got any more napkins

Thanks a ton [member=71889]festal[/member]  [thumbs up] [thumbs up]

The .dxf file format is preferable.  [cool]

Here you gohttps://www.dropbox.com/scl/fi/zhfu...e-v1.dxf?rlkey=x76r3num68bf7p5i7fn2lbu0e&dl=0

 

[Cheese]

Hey [member=44099]Cheese[/member] do you think those hole placements and sizes are the same across the product line? Or would have to keep checking the placements on each box.

Ron

I'd say yes as that way they could use the same molds to manufacture either vertical or horizontal boxes and just swap out the mold inserts that were different. It's also a good insurance policy if a press operator accidentally crashes a mold.  [eek]

 

[rvieceli]

[member=44099]Cheese[/member] time for a road trip?

Clausing 2277 for $900 near Wausau WI
https://www.facebook.com/share/1ER2xgtzTr/

Ron

 

[Cheese]

Thanks for the heads-up Ron [member=3192]rvieceli[/member] .  [big grin]

I'll give them a buzz.