Festool Systainer T-loc worktop

[Northernlight]

Made a worktop after seeing the concept of 3d-printed cleats in another post here on FOG. As i just got myself a 3d-printer i couldnt wait to try these guys out Luckily im adept at 3d-cad. I must say that the worktop is a godsend for my type of work (locksmith / Alarm-technician). Anyone want the STL-files for the cleats they are available on thingiverse. Link down below.

Download the STL-files here

 

[rich024]

Very nice!  Good design!!

 

[c_dwyer]

Nice design.  I used similar 3D clips from the gentleman that originally posted them awhile back for a Midi work top, but needed it to be a little bit larger so I could work bigger peices on it.  And because the T-lock would stick up above the plane when it engaged the tab, I gave it a lift with some 1x2 poplar strips on the bottom which also allowed the clamps to be inserted a bit easier.  I had problems with the clips delaminating though, so I had to wrap them in tape.
[attachthumb=1]

 

[jbasen]

Nice design and thanks for the link to the stl files

 

[flair woodworks]

Nice work.  I like your photos as well.

 

[Northernlight]

Very nice!  Good design!!

Thanks. The worktop is supprisingly usefull.

 

[Northernlight]

Nice design.  I used similar 3D clips from the gentleman that originally posted them awhile back for a Midi work top, but needed it to be a little bit larger so I could work bigger peices on it.  And because the T-lock would stick up above the plane when it engaged the tab, I gave it a lift with some 1x2 poplar strips on the bottom which also allowed the clamps to be inserted a bit easier.  I had problems with the clips delaminating though, so I had to wrap them in tape.
[attachthumb=1]

Yes the clips can tend to delaminate due to the process of 3d-printing. One possibility is to make moulds using 3d-printed parts and cast them in something harder.

Like the big worksurface alot. Will probably make something like it someday

 

[Northernlight]

Nice design and thanks for the link to the stl files

You are welcome! Please post if you make something useful

 

[Northernlight]

Nice work.  I like your photos as well.

Thanks I used to work as a freelance photographer some years ago... im afraid you do loose your touch if you aren´t active and thats exactly what have happened.