Hose end part number for smaller diameter hose

scoffelt

Member
Joined
Jan 23, 2007
Messages
92
I have a Midi and the hose itself is fine, but lately I have been having problems with it staying connected to the tool.  I searched the online catalog but could not find a part number for the end of the hose. Does Festool sell a replacement hose end?  Thanks

Scott C.
 
Never mind, should have just used Google.  Found what I was looking for. Although I will say, what good is an online service parts catalog if you cannot find what you are looking for that way.
 
FYi...I had a well used 27mm hose end that kept falling off the hose at the tool end.  After buying a new 27mm connector, and still having the same results, it turned out that it was the hose causing problems.  I trimmed about 2" off of the hose and that cured it from falling off.  Just looking at the untrimmed hose, it seemed to be fine.  But, I guess the hose had stretched and slightly reduced the hose diameter within the connector.
 
I think that would cause the hose end to come off the hose, instead of the hose end coming of the tool.
 
Back
Top