Kapex KS 120 vs KSC 60

[fvoelling]

Trying to decide between these two - like the combo deal of the cordless 60 with the dust extractor, better miter angles, convenience of cordless, brushless motor, lower weight and price vs the increased capacities of the 120. Don't want to spend another 1k on the mobile stand with extensions as this will mostly be used in my workshop, hoping to make a first gen (1080?) or current gen MFT or a Ridgid mobile stand work with either Kapex saw. Just a DIY guy trying to cut some straight 90 degree bevels in 1x10 boards (the fence on my 12" Bosch compound miter is not straight enough with no adjustment other than sacrificial boards).

Some posts on the 120 hint at motor problems in the past, not sure that's been resolved or blown out of proportion.

Any words of wisdom/advice?

 

[ChuckM]

If you don't need these superior features:

1) Larger cutting capacity
2) Hold-down clamp
3) Better dust collection
4) Top-of-the-world bevel (which is different from miter) control,

you can skip the KS120.

 

[mino]

For workshop use, KS 120.

EDIT:
Meaning, even compared to the KS 60, the KS120 is the way to go. It is just a better saw and it is not that much bigger nor heavier.

 

[Kev]

I have the KAPEX 120 with its trolley and wings and it was like stepping into the future when I upgraded from my Hitachi SCMS (though that little puppy did me well).

Over and above the KAPEX I have a small 18V Metabo SCMS that you could throw about with one hand and a monster 40V Makita 305mm with a custom stand and extensions you could park a truck on (in addition to its reasonably good Makita stand).

These three mitre saws all differ in portability, power, accuracy, capacity, dust collection, ergonomics ... need I go on?

The KAPEX doesn't address my "no mains power" needs. Technically I could perform all of the required cuts with the monster Makita. The Metabo is gutless but its size and weight make it incredibly convenient.

I suppose I'm saying that your requirements will dictate how you progress. Before I moved to a rural location the KAPEX and the little Metabo did everything I needed but I hate messing about with generators so when I moved I went hard into Makita's 40V range (with a few other brands to fill the gaps).

Look hard into your requirements as the KS60 is potentially very limiting. If I personally owned a cordless KS60 I would still want a KS120 in the workshop and in my situation I'd still be missing out on large cut capacities away from mains power.

 

[fvoelling]

Tough decision still! I'll take a look at both in the store today.

Since I will still have my 12" Bosch (albeit with a less than perfect fence but for framing and such I can compensate), the smaller cordless 60 has a lot of appeal for its portability, price and brushless motor (still a bit apprehensive about the reliability of the 120 though you'd hope by now Festool has replaced the armature I read about in a couple of other threads with the improved version).

The combo deal on the 60 with the cordless dust extractor for $1700 (with 4 batteries!) makes that one of those few times where you can get Festool on "sale", and it would allow me to buy other cordless Festool tools without charger/batteries.

 

[mino]

In that case the combo kit looks good. Just checked and the US bundle price is very good.

Though do keep in mind you will absolutely want the new 8.0 packs for the CTC and you will want the new SCA 16 chargers instead of the "Duo" non-AirStream charger.

If you have no 18V Festool stuff, or have very few packs, it is fine. If you already have lots of the 18V packs and chargers, I would look to offload the Duo charger while it is new .. and invest in a set of 8 Ah packs for the CTC once available in US.

All that said.

The combo mentioned by Kev - a KS 120 at "home" and a mobile small SCMS is the better option on comfort of use. By far. Expect to sell on the 12" Bosch pretty fast once you get a hand of the KAPEX .. if you go with the KSC 60, you will be tempted to keep also the Bosch for "those bigger jobs", wasting space etc. Again, talking a hobby user.