Kapex MFT Top Holes

[Grev]

I just ordered/received a MFT top for the smaller Kapex table and it has extra a series of extra 20mm holes on both sides, in addition to the grid pattern on all MFT tables.  Does anyone know the reason for this?  I don't have the actual table, but ordered the top for another project I'm working, where I needed a smaller MFT top.  Just curious?
[attachimg=1]

 

[TOOLTOWN]

The feet of the kapex register in some of these holes to keep in in place and at the correct height to use a regular MFT as outfeed supports.

Ken

 

[Grev]

The feet of the kapex register in some of these holes to keep in in place and at the correct height to use a regular MFT as outfeed supports.

Ken

Thanks Ken .. I thought it might be for that ..

 

[Sino]

Kapex feet register in standard pattern and these additional holes are for bolts to hold kapex firmly in place