curt boyer
Member
- Joined
- Jun 8, 2007
- Messages
- 203
I bought the Coliflower zci for the Kapex about six months ago and it works great, but changing the insert is slow and cumbersome. So I took a grinder and a Dremel and five minutes and bada bing bada boom done! I used a utility knife to carve the square end to match the existing bevel on the insert so it can be inserted from the front. To change the insert the old way you had to completely remove the six screws and lift out the zci plate then slide out the insert. To remove the insert now all you need to do is take a screwdriver and pry the insert from the back towards the front of the saw. It only takes seconds and there is no risk of loosing the screws.