Kapex UG cart extension issue

[Bhend18]

I just got the Kapex UG cart with extensions. I set everything up and when I pulled the extra extensions out I noticed the measurements were not sequential. I'm assuming that this is incorrect and that the measuring tape was put on the wrong sides. Is there any way to change these around or do I need to send them back?

[attachimg=#]

[attachimg=#]

 

[tbellemare]

The number showing on the extension is from the stop to the blade kerf.

Tom

 

[Bhend18]

The number showing on the extension is from the stop to the blade kerf.

Tom

Right, but shouldn't the numbers be in order? (148 then 149, instead of 148 then 240)

 

[tbellemare]

If you push the extension back in, it will eventually be in order. In the image above, it is showing that the stop on the extension is 92mm from the end of the main wing.

Tom

 

[Bhend18]

I understand now. Sometimes this German engineering is over my head.  [big grin]