LS 130

[NYC Tiny Shop]

I was looking at the LS 130 and was wondering why a complete set is not offered as an option, as other tools are offered? For example: tool and  contour attachments in one systainer or a second systainer with attachments and paper.

How are people organizing their new LS130 plus accessories?

 

[gdjenkins10]

I had the same thought last night when I was looking at what I would like to get.

 

[neeleman]

In the Classic systainer line Festool did offer a separate LS 130 accessories set with 8 different parts.
It was called SSH-LS 130-SET (#711980).
Unfortunately it was not continued in the T-Loc line of systainers.

 

[SS Teach]

After getting my LS 130 and realizing I needed several contours, I ended up getting an RTS 400 sandpaper systainer. It doest the job nicely.

 

[semenza]

Here is mine. A Sys - II. Picture is from several years ago the empty slots are now filled with profiles and I have switched the dividers (with a little modifying) into a T-Loc II. 

[attachimg=#]

Seth

 

[Devildawg91]

Seth,

Newbie question, for those interlocking dividers how did you cut them so that they are flat bottomed and interlock?

Would you just use a miter gauge and stand the piece on edge and run it over the blade that way?  I have a WW2 blade on my TS, is that why it would not be a flat bottomed for the interlocking pieces.

I like the idea of creating the insert.

Thanks,
Jason

 

[semenza]

To tell you the truth I don't remember for sure what method I used to cut the half slots. It wasn't a table saw but that should work well with a tall support. I probably cut as far as I could with a miter saw and finished by hand. 

Here is the original thread with more pictures  http://festoolownersgroup.com/festool-and-tanos-systainers/abrasive-systainer-ls130-rts400/

Seth