- Joined
- Jan 22, 2007
- Messages
- 1,134
Hello,
We are now accepting pre-orders for Woodpeckers' Multi-Function Workholding System for the MFT.
[attachimg=2]
The kit addresses challenges with holding thin or tall stock.
[attachimg=1]
Order it with a Systainer or cardboard box.
The kit comes with 24 dogs machined from solid aluminum with raised heads of varying thicknesses and eight 1/4" thick solid phenolic plates in three different shapes:
Visit our website for more details and to order.
We are now accepting pre-orders for Woodpeckers' Multi-Function Workholding System for the MFT.
[attachimg=2]
The kit addresses challenges with holding thin or tall stock.
[attachimg=1]
Order it with a Systainer or cardboard box.
The kit comes with 24 dogs machined from solid aluminum with raised heads of varying thicknesses and eight 1/4" thick solid phenolic plates in three different shapes:
- 8 x 1/8" for thin stock
- 4 x 3/8" for stock in the 1/2" range
- 4 x 0.7" for 3/4" stock
- 4 x 2" for work on edge.
- 4 x "Trick” dogs with a stem for use with the threaded 1/8" thick dogs.
- 2 x Rectangular plates are used along the edge of stock.
- 2 x Extra Wide trapezoidal plates with 20mm hole patterns, designed to be held in place by the bench dogs.
- 4 x Additional trapezoid plates to wedge firmly between the workpiece and the plates held by dogs
Visit our website for more details and to order.
