New "domino killer" dowel guide for drills

[Packard]

You won't be buying standard drill bits.
The outside bits are left hand twist.

View attachment 381918

The CMT bits, for their Boring Jig, are also right and left handed, and are solid carbide. Expensive though, ranging between $25.00 and $30.00 each.

You do have to search for them, but I’ve done it here, but when shopping note the shaft diameter and the overall length. It might not work with all fixtures.

Google Search

 

[Michael Kellough]

Chees said, “...there's a rocket ship leaving for Mars tomorrow that you may want to get a boarding pass for.

It’s just a cruise around the Moon. Hopefully leaving around 6:30 pm Eastern time today.

 

[Cheese]

Chees said, “...there's a rocket ship leaving for Mars tomorrow that you may want to get a boarding pass for.

It’s just a cruise around the Moon. Hopefully leaving around 6:30 pm Eastern time today.

Whoops...I got the right day but the wrong destination.

 

[Crazyraceguy]

The CMT bits, for their Boring Jig, are also right and left handed, and are solid carbide. Expensive though, ranging between $25.00 and $30.00 each.

You do have to search for them, but I’ve done it here, but when shopping note the shaft diameter and the overall length. It might not work with all fixtures.

Google Search

Those are the typical line boring machine type bits, steel shank, carbide tips. They have 10mm shanks, a depth adjusting set screw in the end, a flat face for the attachment screw. The black/orange paint indicates rotation direction.
These same bits also work in concealed hinge boring machines, which require 8mm holes.
The usual line bore holes are 5mm or 1/4", so all 3 sizes are available easily.