New - Lock Fence Dogs

[Sean7a]

Want to attach a fence securely to your MFT, Walko or Workmante?  We just got our first pair in and per the usual Tool Improvements goodies, they're very well made and worth the cash.  A nice thumb screw on the bottom will remove any play if you have some worn in holes on your MFT>

http://www.festoolproducts.com/Tool-Improvements-Lock-Fence-Dogs-with-8-mm-Thumb-p/lock-fence-dogs-pair.htm

100% money back satisfaction guarantee offered by Tool Improvements.  Why not give it a shot?

 

[Kodi Crescent]

Is there an Incra or 8020 fence that will sit slightly under the crosscut rail like the original Festool one does?

 

[builderbob]

I have the adjustable version of these dogs and I love em!

 

[rmwarren]

Is there an Incra or 8020 fence that will sit slightly under the crosscut rail like the original Festool one does?

I don't think so. The Festool fence is cut down at the end that goes under the guide rail. I have not found any other extrusion < 0.5" high that has a t-slot on the edge that will fit the dogs.

RMW

 

[Corwin]

Is there an Incra or 8020 fence that will sit slightly under the crosscut rail like the original Festool one does?

I don't think so. The Festool fence is cut down at the end that goes under the guide rail. I have not found any other extrusion < 0.5" high that has a t-slot on the edge that will fit the dogs.

RMW

If the slots in the dogs for mounting the fence are tall enough, you may be able to mount a base under an Incra Incremental Track that could extend under the rail.  Just a thought.

 

[Tinker]

Is there an Incra or 8020 fence that will sit slightly under the crosscut rail like the original Festool one does?

I don't think so. The Festool fence is cut down at the end that goes under the guide rail. I have not found any other extrusion < 0.5" high that has a t-slot on the edge that will fit the dogs.

RMW

If the slots in the dogs for mounting the fence are tall enough, you may be able to mount a base under an Incra Incremental Track that could extend under the rail.  Just a thought.

I work with 3/4" strips on top of my MFT.  With the Fetoy fence held vertically with the lock dogs, i can work with wood that is 5/8". 
I have some 1/4" hardboard i can add if I want to work with 1/2" wood.

I only have one set of lock dogs and will pick up at least another set.  There is just a tad more flex in my fence than i like.  One more dog would work perfect.

I like the looks of the newer dogs.  I have an older set that the knob at bottom seems to work lose in time. 
Tinker