OF 1010 Dimensions

[Len R]

Can anyone who owns an OF 1010 EQ router measure it and tell me exactly how tall it is?  I need to route some grooves in an already built piece and the router must be less than 8" tall to fit in. 

Thanks.

 

[Peter_C]

I got roughly 6 7/8" compressed and 8 3/4" at full height. Measuring tools were kinda lame, as in a fabric tape measure and a book. You could probably get more out of it, but still need clearance for the bit and it should fall within your requirements.

"The OF 1010 EQ Router provides a smooth 2-1/8" plunge action"

Might be able to cut a bit down if needed.

 

[RussellS]

My OF1000 measures 7.25" at the lowest.  And 8.75" at the highest.

 

[Peter_C]

My OF1000 measures 7.25" at the lowest.  And 8.75" at the highest.

Did you cut the flip adjuster loose on the scale? I didn't the first time and had to remeasure.

Edit: This one.

 

[RussellS]

Re-measured.  6.875 inches now at the lowest.  With the collet tightened and touching the table.

 

[Len R]

Thanks guys, that's very helpful.