OF1010 Accessories

C

cgmojoco

Member
Joined
Mar 19, 2012
Messages
270
What accessories do you guys use (besides LR32) for the OF1010---and are they available in a set?
 
There is a micro adjuster that is handy when routing with the guide rail.
Maybe some copy rings, although I'm getting tired of the manual centering of the rings. I' looking towards OF1400 or 2200 to get the automatic centering feature.

Not an "accessory", perhaps.. But the MFS is a good companion =)
 
the fences that turn it into a horozontal position for cutting lippings flush . when i buy a 1010 i will buy them
 
Brice shows them on his blog, im definitely getting the 1010 and the accessories bc of it. Thanks Brice for assisting me to send more money to the homeland. Eric
 
Here is a list of some of the OF1010 accessories that interested me...the top few are the most interesting and I believe are what is referenced in the blog but you should go there to make sure you get what you need.

Maybe someone else can use this...it was a little tricky to look through the accessories on the Festool USA site and filter out what I did and didn't want to look at... (the options are there, just wasn't quite straight forward for me).

I have the MFS 700---just have to learn how to use the darn thing.

Taking a Festool routing class in Vegas in September, wanted to get all parts we might potentially explore and test them so that I can bring up pertinent questions in the class.

I have the OF2200 and the set, but OF1010 apparently doesn't have a set so had to do some hunting...

Part #Description Cost Link
486052Angle Arm for $39.00 http://www.festoolusa.com/products/routers/template-guides-imperial/angle-arm-486052.html
486058Edging Plate $58.00 http://www.festoolusa.com/products/routers/other-accessories/edging-plate-486058.html
486242Chip Deflector $24.00 http://www.festoolusa.com/products/routers/other-accessories/chip-deflector-486242.html
489427Edge Guide $38.00 http://www.festoolusa.com/products/routers/edge-guides-stops-and-circles/edge-guide-489427.html
488754Fine Adjustment $23.00 http://www.festoolusa.com/products/routers/other-accessories/fine-adjustment-488754.html
438608Support Foot $4.00 http://www.festoolusa.com/products/routers/other-accessories/support-foot-438608.html
492728Routing Slide $131.00 http://www.festoolusa.com/products/routers/mfs-template-guide/routing-slide-492728.html
483922Trammel Unit $22.00 http://www.festoolusa.com/products/routers/edge-guides-stops-and-circles/trammel-unit-483922.html
484176Template Guide, 13.8mm OD / 11mm ID $13.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-138mm-od-11mm-id-484176.html
486029Template Guide, 10.8 mm OD / 9 mm ID $13.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-108-mm-od-9-mm-id-486029.html
486030Template Guide, 17 mm OD / 15 mm ID $13.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-17-mm-od-15-mm-id-486030.html
486031Template Guide, 24 mm OD / 21 mm ID $12.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-24-mm-od-21-mm-id-486031.html
486032Template Guide, 27 mm OD / 25 mm ID $12.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-27-mm-od-25-mm-id-486032.html
486033Template Guide, 30 mm OD / 27 mm ID $12.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-30-mm-od-27-mm-id-486033.html
486034Template Guide, 40 mm Od / 37 mm Id $12.00 http://www.festoolusa.com/products/routers/template-guides-metric/template-guide-40-mm-od-37-mm-id-486034.html
486534Copier Scanning Set $61.00 http://www.festoolusa.com/products/routers/other-accessories/copier-scanning-set-486534.html
488756Extension Table $39.00 http://www.festoolusa.com/products/routers/edge-trimming/extension-table-488756.html
489229Hard Fiber Base Runner $17.00 http://www.festoolusa.com/products/routers/other-accessories/hard-fiber-base-runner-489229.html
490772Template Guide, 8.5 mm OD / 6.5 mm ID $14.00 http://www.festoolusa.com/products/routers/vs-600-jointing-system/template-guide-85-mm-od-65-mm-id-490772.html
492187Centering Mandrel $28.00 http://www.festoolusa.com/products/routers/other-accessories/centering-mandrel-492187.html
493139Table Widener $110.00 http://www.festoolusa.com/products/routers/other-accessories/table-widener-493139.html
 
That's a good list, Chris.

What I see missing is 483358, the Fine Adjuster for the Edge Guide, 489427, and the 437307, which is the Chip Catcher for the Edge Guide. Bizarre as it may seem, it is sold separately.

Tom
 
Thanks Tom!

You know what, its easier to find these things in their catalog vs. the website in hindsight...
 
Tinker said:
Brice Burrell said:
ericbuggeln said:
Brice shows them on his blog, im definitely getting the 1010 and the accessories bc of it. Thanks Brice for assisting me to send more money to the homeland. Eric
Click to expand...

Festool edge routing accessories, The Green and Dark Blue blog.
Click to expand...

Brice, Will those accessories fit my OF 1000?
Tinker
Click to expand...

I've never seen the 1000 so your guess is as good as mine.  Since we're guessing, I'm think there is a good chance of the angle arm and edging plate fitting, which is all you really need.  The chip catcher is a crap shoot.  Give Festool or a long time dealer a call to be sure, or maybe one will chime in.
 
Thanks Brice and Don.
I think i will take a little ride today and visit the Nuts at that Tool place in Y-town
Tinker
 
I love the of1010 router, my mate at work has one he let me use it, it was a joy to use smooth operation and nice and light, perfect for mdf mouldings ect.....

I think I made the wrong choice on buying the of1400, to big for small jobs & to small for big jobs,

Oh well you can never have enough routers I'll have to buy all three :)
 
You must log in or register to reply here.

Similar threads

onocoffee
A Little Bit Confused About The OF1010...
Replies
11
Views
1K
Coen
C
G
Drilling 1,200 holes.
2
Replies
22
Views
560
tjbnwi
tjbnwi
D
Possible Trading my 8mm OF1010 Chuck for 1/4'' Chuck
Replies
0
Views
101
donpohlio
D
O
Dust extraction for multiple festool tools in a workshop?
Replies
11
Views
442
Hawkeye0001
H
Festdewalkita
What happened to the OF 1010?
Replies
9
Views
1K
Festdewalkita
Festdewalkita
Back
Top