Posso T-box 400

[tazprime38]

I see you have used bits of pipe as organisers to hold tools. I have done a similar thing in my CK tool tote bag. Make life easier as all tools have their place - at least until you have used a lot of those tools and they get dumped in their.

 

[crazydave789]

yeah I used to use pipe to hold hacksaw blades, spade bits long bits etc.. extra holes and slots for rulers, round files, egg whisks etc.. as there was a lot if unused space around the box, I could get an awfull lot in the old little box, the new one I never got around to sorting out and the big one it was impossible to just hoik everything over to. as I literally chose tools that specifically fit into a certain sized hole or slot.

I'll get around to it - eventually

oh the first little one I had, I made an mdf top for which allowed me to use it as baby sawing block and I also used to have a baby vice on it for small things and clipped chisels and a thorex hammer to the outside, very handy.

 

[crazydave789]

thread ressurection but I stumbled across these by accident. and seeing as there was some interest a couple of years ago.
https://www.amazon.co.uk/Posso-Tool...?ie=UTF8&qid=1540933297&sr=8-1&keywords=posso+t400

still a cracking bit of kit and I do like the black look, it fits quite nicely with the systainer ethos IMO.

its also available for 55 euros but no idea on delivery costs from france.

or
https://www.ebay.co.uk/itm/BOX-FOR-TOOLS-TBOX-400-EURONEGOCE-POSSO/152481515894?hash=item23809b4976:g:6sgAAOSwol5Y40Pb:rk:1f:0

 

[wakyct]

Cool! It was the hand tool systainer inserts like these that first got me thinking to transition to systainers once I saw the possibilities.

Looking at these makes me wonder about some 3D printed tool clips that you could arrange how you like on a bare ply systainer insert, as when I was making my insert doing all the tool slots/holes was the majority of the work and once it's done you can't really change it up.