Shapeable Metal Rods/Dowels

[kenobi]

Hi everyone!  I'm new to the group and have been exploring the site for a few weeks now.  However, this is my first post. I'm in the process of building a pantry cabinet much like the one in this picture.  I'm having a difficult time locating a supplier for some shapeable metal rods to use to make the rails to aid in keeping items on the shelves.  I'm thinking I need them to be about 14-15 inches in length to accommodate the bends.  I briefly considered using straight wooden dowels, but since I've made the shelves adjustable, I want the rails to go with the shelves.  I'm also open to other ideas for the rails.  Ideas anyone?

I've added a link to the pic to avoid copyright issues.

Thanks!

Ken

http://www.helpful-kitchen-tips.com/kitchen-blog/2010/04/12/kitchen-pantry-cabinet-review-kitchen-storage-ideas/

 

[peter halle]

Welcome to the forum.  I would suggest that you do a google search for wire cabinet pulls.  That is what appears to have been used in that image.  Available in multiple sizes and finishes.

Peter

 

[Eli]

+1 what Peter said

 

[tbellemare]

Or, get some heavy gauge wire and make your own.

Tom

 

[dltflt]

If you have an Ikea close they carry several sizes but they are three pieces.

 

[kenobi]

Thanks for the welcome and the replies!  I had thought about using cabinet pulls but wasn't sure if there might be a better way to go.  I will see what I can find.  Thanks again!

 

[nclemmons]

You could use aluminum rod from the hardware store and bend it around a form.  Optionally drill and tap the ends to receive a 8-32 screw.  I have purchased the aluminum rod and used a drill and steel wool to polish it as one approach.

Neil

 

[leakyroof]

For a supplier that takes credit cards on-line and ships right away, try Mc-Master Carr. They stock all sorts of metal products in addition to stocking just about everything else... [blink]
When I need something like you've described for a custom made type thing, they're the first place I tend to research since you don't need a commerical account to buy from them.

 

[kenobi]

Thanks!  I will check that out.  I still haven't decided on which way to go since this project is a "spare time" thing. 

 

[kenobi]

Update - I finally found the wire cabinet pulls that I need for this project.  I had a Lee Valley catalog here that they had sent me with a previous order and was looking through it and found exactly what I needed!  I was having difficulty finding them that were long enough and didn't break the bank as I needed 30 of them.  Then this morning I'm going through some boxes in the garage and found the catalog.  They had exactly what I needed, so I hopped on their website and placed the order.  Funny thing is that I've ordered hardware from them several times before, but didn't even think of looking there until I found that catalog! 

Many thanks for all the ideas and suggestions.  Now I need to get the cabinet done so that when the hardware gets here, I'll be ready for it.

Ken