StaySharp Festool Compatible 2-way Blast Gate solves my vacuum problem

[salbrechtnh]

Over the last 10 years I have been continualy frustrated with changing vacuum hoses when I switch tools. I wanted to use vac connections that have inputs for each tool without switching hoses every time I changed tools. I know Festool has the "Y" Adapter and it works well on my CMS router table. However, when connecting multiple single tools to the Y-adapter the vacuum pulls from both connections thereby reducing the vacuum CFM at each tool. I wanted a blast gate. Festool does not offer one that I am aware. I have tried various other brand blast gates, but then I end up with incompatible hose connectors.  [sad] I found a blast gate made by StaySharpWoodworking on Etsy. It just arrived and I am EXTREMELY impressed. I have connected it and it works perfectly allowing me to stay 100% Festool except for this one item. Fortunately, it is Festool blue & green so it looks like a match.  [big grin] I don't know if other people have been frustrated with the same problem, so I thought I would pass on my experiences in this area. I hope it benefits someone. 

 

[ChuckS]

I've been keeping an eye on this product development (now supposedly in the testing phase) that "is very compact (unlike the Y-splitter), and can be switched from one hose to the other in a second with just a single movement. It works with most dust extractors/shop vacuums."
https://www.festoolownersgroup.com/...change-between-two-hoses/msg679552/#msg679552

 

[gwendal]

The blast gate from StaySharpWoodworking reminds me this 3-way blast gate on printables.com.

Recently a new 2-way blast gate showed up, it looks more compact and easier to use with a single lever.

 

[ChuckS]

Is it a concern in terms of suction loss that the 2-way blast gate (hoses) is at a right angle to the suction hose? The switch design does look promising though.

I asked because the SawStop right angle elbow makes its over-the-table dust collection arm much less effective.

 

[salbrechtnh]

The first day using the StaySharp blast gate was yesterday and it work well on the Kapex, sander and track saw. It is connected to a CT-15.

 

[ChuckS]

The blast gate from StaySharpWoodworking reminds me this 3-way blast gate on printables.com.

Recently a new 2-way blast gate showed up, it looks more compact and easier to use with a single lever.

From your etsy link, this caught my attention:
https://www.etsy.com/ca/listing/1533411403/festool-dust-extractor-y-splitter-blast

In one of the photos, the caption says "Sorry for the Orange!" Why? Ridgid is a decent tool, with life-time warranty (and that's how I got a free thickness planer replacement).