Thank you Festool.

[Stephen B]

Sold
[size=12pt]Thank you Festool.

[attachimg=1]

 

[grobkuschelig]

Would you mind sharing more? Or was there a thread I missed?
Did you do the complete house? Before/After?

 

[NHSP759]

Beautiful work dude! Looks like the new digs will need the special touch too?

 

[alkaline]

[member=19746]Untidy Shop[/member]

Wau, festool should also say thank you.

  [smile] [wink] [smile]

 

[Stephen B]

[attachimg=1]​

[member=19746]Untidy Shop[/member]

Wau, festool should also say thank you.

  [smile] [wink] [smile]

[size=13pt]Yes [member=21192]alkaline[/member]  perhaps they should for many a purchase, and as we see below FOG posts and videos, were justified  by this restoration.  [smile] It did not help that my dealer was 10mins by car away. Now I no longer travel to the city weekly and he is 1hr 40mins away.  [eek]
_________________________

Thanks for your interest and comments  [member=63474]grobkuschelig[/member] and [member=27126]ChrisK1970[/member].

This was our now former inner city house which we restored part time over the past five years.

The house/shop was originally built around 1860 with an incomplete rear extension attached  in 1980. The task was to restore/ renovate but not significantly change/re-design the original building.  This included floor to ceiling repairs and refinishing, repairing the roof, re rendering the exterior  and completing the extension interior. Some plumbing was also replaced including the rebuilding of a shower set.

There have been numerous FOG posts along the way with regard to some  specific tasks such as restoring/sanding doors, matching new and old timber [Thanks [member=1674]Peter Halle[/member]  ] constructing a bench top, installing a lining board ceiling, treating window frames, demolition and building a rear deck and naturally, some discussion of the odd related Festool purchase.

Some examples -
[size=12pt]
Projects –

Island Benchtop
[size=10pt]http://festoolownersgroup.com/member-projects/my-magnificent-failure-(and-recovery)/msg281207/#msg281207http://festoolownersgroup.com/festool-how-to/attaching-breadboards/msg508752/#msg508752http://festoolownersgroup.com/finis...butcher-block-countertop/msg266329/#msg266329http://festoolownersgroup.com/ask-festool/domino's-as-a-pinned-tenon/msg405023/#msg405023
Reply #4
[size=12pt]
Merbu Decking
Recycling timber from demolished deck –
[size=10pt]http://festoolownersgroup.com/workshops-and-mobile-vehicle-based-shops/the-tidying-of-the-untidy-shop-project-1/msg323579/#msg323579
Reply #1
[size=12pt]
Building new deck
[size=10pt]http://festoolownersgroup.com/member-projects/what-about-the-other-7-000-plus-out-their/60/
Reply #292
[size=12pt]
Making wide skirting boards
[size=10pt]http://festoolownersgroup.com/member-projects/making-a-wider-skirting-board/msg326694/#msg326694
[size=12pt]
Rebuilding a batten door
[size=10pt]http://festoolownersgroup.com/member-projects/what-about-the-other-7-000-plus-out-their/msg426308/#msg426308
Reply 403
[size=12pt]
Lining Boards
[size=10pt]http://festoolownersgroup.com/member-projects/what-about-the-other-7-000-plus-out-their/60/
Reply #347
http://festoolownersgroup.com/membe...her-7-000-plus-out-their/msg310068/#msg310068
Replys # 348/9

[size=12pt]Finishing
[size=10pt]http://festoolownersgroup.com/finishing/patina-challenge/msg282490/#msg282490
http://festoolownersgroup.com/build...-old-window-puttysilicon/msg290644/#msg290644
http://festoolownersgroup.com/membe...eld-with-concrete-mortar/msg266537/#msg266537      Reply #4

[size=12pt]Locksmithing
[size=10pt]http://festoolownersgroup.com/home-improvement-other-projects/removing-a-locked-lockwood-single-cylinder-deadlatch/msg393160/#msg393160

[size=12pt]Accuracy when restoring an old house –
[size=10pt]http://festoolownersgroup.com/general-friendly-chat/how-accurate-is-your-work-project/msg379385/#msg379385
Reply #18

[size=13pt]Tools -
[size=12pt]
Reaction of others to Festool.
[size=10pt]http://festoolownersgroup.com/festool-tools-accessories/its-really-the-technology/msg340625/#msg340625http://festoolownersgroup.com/fun-games-diversions/cat-on-a-hot-tin-roof!/msg343990/#msg343990
[size=12pt]
Tools Other
[size=10pt]http://festoolownersgroup.com/festool-tool-reviews/domino-df-500-what-are-your-experiences/msg261329/#msg261329
http://festoolownersgroup.com/festool-tool-reviews/ct-wings-short-review/msg381550/#msg381550
http://festoolownersgroup.com/other...bench-on-site-what-to-do/msg287840/#msg287840
http://festoolownersgroup.com/festool-how-to/ripping-header/msg457741/#msg457741
Reply #3

[size=13pt]
And the odd video included some related projects and/or was shot fully or partly there too -




__________

And my appreciation to all the FOG members who contributed to the above listed Threads and so assisted in this project.

 

[Phil Beckley]

...... [smile]...that's cool.
rg
Phil

 

[semenza]

Very nice!  [thumbs up]

That certainly demonstrates the info that can be garnered from this forum. And in turn all the input from that members provide! Excellent!

Seth

 

[Stephen B]

Thanks [member=1619]SRSemenza[/member]  and [member=41214]Phil Beckley[/member]  for your comments. Yes Seth, this house does certainly represent some significant benefits from FOG engagement. Very satisfying.  [smile]
______________________

[member=27126]ChrisK1970[/member]  re the new digs -http://festoolownersgroup.com/member-projects/a-house/msg402125/#msg402125

Work continues.  [eek] [smile]

 

[NHSP759]

Holy smokes! 2015!!!! I knew I read a topic but I can't believe it was that long ago! Looks awesome bro!