Todays work

[knight joinery]

Pine louvered door nothing technical square shouldered tenons, through mortices, cut the louvers in with the dado head on the radial arm saw. Just cutting 52 louver slots to pin point accuracy left my head in a spin.

[attachimg=#]

 

[galwaydude18@gmail.com]

Nice work!

 

[knight joinery]

Thanks, there not difficult but Im glad I havent got lots of them to do or my head would fall off. We once had 300 bin shed gates to do all of them had these geometic vent pattern holes in them they were ok to start off with but after your first 20 it was as boring as sin. Luckily I had the lads to do the donkey work back then.

 

[Deansocial]

Thanks, there not difficult but Im glad I havent got lots of them to do or my head would fall off. We once had 300 bin shed gates to do all of them had these geometic vent pattern holes in them they were ok to start off with but after your first 20 it was as boring as sin. Luckily I had the lads to do the donkey work back then.

Sometime i like work like that, can switch off a little, soon gets boring

 

[IWT-Tom]

Nice to get in the Zone every now and then.

 

[knight joinery]

I like glass beading like that as you say its just turn off an go, I must have spent years of my working life just cutting beads we have an old mitre guillotine somewhere that was an amazing bit of kit looked lethal but was so nice to bead your windows without that roaw every 5mins. Im sure the HSE would have kittens if they saw it though. Kind of like our old whitehill blocks which we got rid of on ebay lol

 

[jmbfestool]

I like glass beading like that as you say its just turn off an go, I must have spent years of my working life just cutting beads we have an old mitre guillotine somewhere that was an amazing bit of kit looked lethal but was so nice to bead your windows without that roaw every 5mins. Im sure the HSE would have kittens if they saw it though. Kind of like our old whitehill blocks which we got rid of on ebay lol

Well you can do all my beading hate doing it.  Panel beading,glass beading not for me  I can do it for a bit then soon get bored and fed up needing to just nibble a little off to get a nice fit.

JMB

 

[jmbfestool]

Thanks, there not difficult but Im glad I havent got lots of them to do or my head would fall off. We once had 300 bin shed gates to do all of them had these geometic vent pattern holes in them they were ok to start off with but after your first 20 it was as boring as sin. Luckily I had the lads to do the donkey work back then.

Sometime i like work like that, can switch off a little, soon gets boring

Well on my jobs you always seem to work like that haahaaa

 

[Deansocial]

That because you start going on how do to at 10 times the cost and i switch off

 

[knight joinery]

That because you start going on how do to at 10 times the cost and i switch off

LOL