TS55 decision

[pjcoop]

Hello all,
After saving, I am now ready to buy a TS55 to add to my ETS125 and CT26. My problem is the TS55R that could be coming in the next months, is it worth it to wait or take the plunge and just buy the 55. I have no pressing need for it, other than the money burning a hole in my pocket and i have been waiting a long time for it.
Thanks for your help
Peter

Also for anybody that has used both what would you do.

 

[Brice Burrell]

Since you don't have an immediate need the only reason to buy now would be to save a few bucks on the current model versus the new R model.   

 

[skids]

I would wait..You scraped to get here, get the one that is the most current. Unless you get a deal on the TS55.

 

[jacko9]

I would wait since Festool seems to keep improving their tools with every revision unlike other tool manufactures that tend to keep cutting corners to save a buck.

Jack

 

[HaKLc]

I would go for TS 55 R. Just check on youtube and than decide.

 

[Timtool]

I wouldn't buy a new tool, knowing an new version would come out soon.
I say try to get your hands on a used one, and then sell it before the R comes out. Because the R may render the old TS55 less attractive and chances are that auction site are going to be flooded with them when the R comes.

 

[ccarrolladams]

Already I own many TS55, yet with my primary Festool dealer I have pre-ordered a TS55-R.

I did the same thing when the CT-26 and 36 were on the way. I owned several CT22 and wanted more at good prices, so all could use the same kind of bags.

I pre-ordered a CT36 and notified all the dealers local to me that I would buy more left over or lightly used CT22. The 3 CT22 I bought all functioned like new. I keep the CT36 ready to go to sites. It still looks new and impresses clients.

Although the TS55 can be a very versatile saw, I only use them doing precision breaking down of sheet material involving miter and/or bevel cuts. Because I am traveling to Europe much less frequently these days, the TR55-R is the first major Festool I have not had a chance to use long in advance of it being available in the USA. Friends I trust in the UK and Europe say the TR55-R is fine, but for what I do with the TS55 not likely to change my work habits.

My attitude is I cannot know all the TS55-R benefits until I own one and use it. I am confident of my TS55s, so want to expand my fleet of them slightly, so long as I can do so at fair prices.

 

[sancho57]

I wonder if they are going to have close out sales on the older models?  I wouldnt mind picking up a TS 75 for thicker material

 

[Distinctive Interiors]

I thought about getting a TS55 R here in the UK. I looked at the additional features of the R model over the previous model 55.

Personally, I did'nt see much additional benefit for the tasks that I use the saw for so ended up buying the 55 EBQ from a local dealer for £280 with a T Loc Systainer ($444 at the current rate of exchange). The 55R is currently on sale here for approx £330 ($523). These prices include VAT at 20%.

I am more than happy with the 55 EBQ and do find it easier to use than my slightly heavier TS75.

I assume that when the 55R shows up over the other side of the pond, that similar deals will be available to you.

Tim.

 

[pjcoop]

I have been looking at the reviews and videos of the new 55R and the main claim to fame of cutting close to wall and dual depth gauge with micro adjust seem to be the biggest changes. Cutting close to wall does not excite me. Dual depth gauge is neat but really is it hard to add 5 mm and when breaking down sheet  goods do you not want to be deeper that just breaking the surface so precision is not that important.
Correct me if I am wrong.
Thanks
Peter

 

[Distinctive Interiors]

I agree Peter. Those additional features certainly did'nt rock my boat.

Having been using my TS75 for cutting up and breaking down panel products, and having to allow for the 5mm of the rail, it is no hardship.

My advice would be to look at what you think you are going to use the saw for, then see if those new additions of the 55R are going to benefit you in the work that you do.

Tim.

 

[peter halle]

One feature that I don't think anyone mentioned in this thread was the fact that the auxiliary splinter guards can be used when making a bevel cut.  That personally peaks my interest.

Peter

 

[Kev]

Buy and EST150/3 and a RO90 and start saving again  [big grin]

 

[HaKLc]

Here in Slovenia TS55 EBQ in systainer + guide rail costs 529€ and that is "action price". I can get that saw for 458€ + 20€ shipping on Ebay.
TS55 REBQ costs 468€ + shipping. Not much of a difference in price, but I would still choose newer model.

If a EBQ was a bit cheaper, then I would go for it.