Tsc 55

[glass1]

How's the power compared to corded? What is the consensus on this this Saw?

 

[Holmz]

Some people that need them in the field often really need the HKS (I think) - basicallymore of a carpenter saw, than a cabinet saw.

If it is in a shop on a vacuum then corded plugs into a vacuum.

It is hard to beat a cordless drill, and some argue for a cordless jig saw can be made. For a circular saw one needs a ladder, or some place outside of a shop, in order to make it more mandatory. IMO

 

[Summerson]

I replaced my TS55 with the TSC... I'm very satisfied. Don't mind switching the vacuum on and off manually, can't be too cordless on the construction sight if you ask me.

Its powerful enough, maybe a little less power than corded. The machine will not tolerate that you stress it, so let the machine do the work.

I have two 6,2 Ah batteries in it, they run out rather quickly. It does not work with compact batteries. Plywood is no problem but a lot of thick wood, then corded is probably the sane choice.

 

[MrToolJunkie]

I use mine more than the TS75. Plenty of power and my batteries last awhile. Two sets always have one ready to go.

 

[glass1]

So that's one for short on power and runtime and one for good power and run time.

 

[Cheese]

I think it's more about the material and the thickness of the material. Power of the TSC 55 & TS 55 are pretty much the same. However, if I have a lot of 4/4 or 5/4 hardwood to cut, I choose the TS 55 and the CT 22.  If it's ply, MDF or cement board, I grab the TSC 55 and the dust bag.

Today I'll be installing several custom Jatoba HVAC grilles in 3/4" maple & oak strip flooring. All will be installed using the TSC, a guide rail and a Vecturo.

 

[ear3]

In my experience, the TSC actually performs better under load than the corded version.  My TS55 struggled when ripping 1 1/2"+ hardwood, but the TSC cuts great even when maxing out the depth.  I sold the corded version after a couple of months using the TSC.

As long as you get some backup batteries, I don't think there are any sacrifices you make with the TSC over the corded version.

 

[antss]

I'm wondering if the "c" version simply has more torque ? 

That'd make a difference cutting thick hardwood.

 

[Dan1210]

Its odd theres not more real world reviews of this saw, im just about to pull the trigger on one but it doesn't seem its set the world on fire, on a side note im blown away with my milwaukee fuel 7" saw. Personally I would prefer it ran on a single battery.

 

[gsdvorak]

I guessing the C is for cordless but not sure.  I've been considering this saw as well but am torn between this vs. the HKC55 since, in addition to furniture, I occasionally do some rough carpentry for charitable work and the HKC55 has advantages for this.  I would like to have a cordless saw but don't think I can afford both models.

Would like any feedback from anyone with similar situation and why you would choose one over the other.

Thanks and Regards,
Gerald

 

[RKA]

I'm going to say the battery life isn't what I expected.  I started with (my estimate) at least 3/4 charge on the batteries and couldn't finish a single 10-11 ft long notched stringer (2x12 construction grade pine).  Most of the cuts were plunge cuts which may have prematurely drained the batteries, not sure.

 

[Dan1210]

Most of my work is trim and cabinet installs, how does this saw cut on one battery? As most of an install is 18mm panels im wondering if one battery would suffice, then use the 2 batts for worktop cuts.

 

[tjbnwi]

I really like my TSC 55. It does not have the power of the TS, but I'm not disappointed with it. I don't recall ever running mine on a single battery.

I recently booth the HK 55. Works great for some things, I do not feel it is a replacement for the TS style saw. My preference is the TS.

My first impressions of the TSC-55 (can't believe I've had it 2 years already).


Ripping composite with the TSC.


Tom

 

[MrToolJunkie]

My batteries last a long time. I think this is a great saw in all areas and recommend it. I might even go as far as keeping it over my TS75 if I had to choose. Not being tethered is so nice for so many cuts. The dust bag does fill up quickly and can be an annoyance when cutting thicker hardwood.

 

[Dan1210]

Would be great if we had a video showing the saw on one battery, can it rip an 18mm melamine panel cleanly with a single battery?

 

[MrToolJunkie]

Would be great if we had a video showing the saw on one battery, can it rip an 18mm melamine panel cleanly with a single battery?

Yes, but just slower - the RPM is reduced with one battery or with a lower voltage battery.