Vecturo Sanding

Birdhunter

Member
Joined
Jun 16, 2012
Messages
4,145
I've looked through 18 Amazon pages looking for the Fein Supercut triangular sanding pad holder without luck. I have an old Fein vibratory sander with a jillion triangular hook & loop pads that I'd like to be able to use on my Vecturo.

A link to a vendor would be appreciated.
 
The Fein SuperCut doesn't have a matching sanding pad.
You need one from the Multimaster and then use the special MM adapter on the SuperCut.
63806142029_flat_thin_sanding_pad_fein_multimaster.jpg
212517_xl.jpg
 
Thanks for the info. Maybe, I'll wait until Festool offers some sanding accessories for the Vecturo. In the meantime, I'll just use my Fein.
 
Birdhunter said:
Thanks for the info. Maybe, I'll wait until Festool offers some sanding accessories for the Vecturo. In the meantime, I'll just use my Fein.

Hi Birdhunter! Don't hold your breath for Festool to release any sort of adapter for the Vecturo. Fein never intended for the Supercut to be used for sanding applications, and their representatives strongly recommended against that type of use. If you need a delta sander you will be much better served by investing in a RO-90, DX93, or DTS 400 with a proper orbital sanding motion.

While the Multimaster can tackle a multitude of tasks, the Supercut/Vecturo is a cutting specialist, and I doubt we'll ever see sanding accessories for them, be it sanding pads, dust extraction, etc.... Probably not the answer you were hoping for, but this has been Fein's position for more than a decade, and I doubt Festool would deviate, particularly since they already sell a variety of detail sanders. Hope this helps!
 
i agree.  about the only sanding i've done with my fein supercut is to remove the scale from hot rolled steel so i could get a hot patina to take--a very tough process but the fein was the only "sander" i had that would do it.  for nice controlled detail sanding on wood, the festool ro90 with delta attachment is excellent.
 
Back
Top