What Festool Did You buy Today?

Lincoln said:
Grabbed a DF500 yesterday, to go with my DF700. I had hoped to make use of the Senaca adapter, to use smaller cutters in my 700, but it just didn't work out for me. 
The tenon/cutter set is part of the upcoming February promotion down here in Aus, according to my supplier, so have one of them on hold until then.

They've gone up in price heaps over the last few years, I got my DF500 starter sets for $230 from VEK tools. Don't know if your after any for the XL but Beyond Tools has a couple sets on special:
https://beyondtools.com/products/domino-xl-beech-8mm-10mm-starter-systainer-set-498204-by-festool
https://beyondtools.com/products/12mm-14mm-beech-domino-xl-starter-systainer-set-498205-by-festool
 
Hello there,

my new DF 500 Q arrived yesterday with some accessories as well as the installer set and the starter set for the DF 500.
If you had asked me 1,5 years ago about buying these tools, I would have declared you insane :D

I really like the tools they produce, and I am looking forward to some projects in the future.

 

Attachments

  • DF 500.jpg
    DF 500.jpg
    208.2 KB · Views: 179
  • Installer-set.jpg
    Installer-set.jpg
    327.3 KB · Views: 169
I hope you'll find the DF500 a game changer as many of us do. Move beyond its basics, and you'll be amazed how versatile it is. The only tool that I won't give up before the DF500 is my SawStop. Anything else, including the Kapex, is not as important.
 
ChuckS said:
I hope you'll find the DF500 a game changer as many of us do. Move beyond its basics, and you'll be amazed how versatile it is. The only tool that I won't give up before the DF500 is my SawStop. Anything else, including the Kapex, is not as important.

It definitely is a game changer. The holes I drilled were absolutely perfect! I would not give up on my C18 set as well. With all the adapters, it is a must-have for me as well. And this little drill is the reason why I got hooked on this stuff.

I have also received an Of 1010, which will provide some new skills I have to master.

I will let you know about the projects soon.

Best regards
 
ChuckS said:
I hope you'll find the DF500 a game changer as many of us do. Move beyond its basics, and you'll be amazed how versatile it is. The only tool that I won't give up before the DF500 is my SawStop. Anything else, including the Kapex, is not as important.
The DF500 was my first also, and the gateway to the rest. It truly was a gamechanger for me.
There are others I consider 100% required for the way I work though. The TS55, CXS, and MFK700, I wouldn't be without any of them. This would be followed quickly by an RO125, OF1010, and a CT15.
I love my CT26, but as bare minimum essentials, the CT15 would be first.

 
Planex 2 soft pad and the BT adapter for the CT36 AC so i can run a hand sander and Milwaukee M18 Track saw :)
 
luvmytoolz said:
Lincoln said:
Grabbed a DF500 yesterday, to go with my DF700. I had hoped to make use of the Senaca adapter, to use smaller cutters in my 700, but it just didn't work out for me. 
The tenon/cutter set is part of the upcoming February promotion down here in Aus, according to my supplier, so have one of them on hold until then.

They've gone up in price heaps over the last few years, I got my DF500 starter sets for $230 from VEK tools. Don't know if your after any for the XL but Beyond Tools has a couple sets on special:
https://beyondtools.com/products/domino-xl-beech-8mm-10mm-starter-systainer-set-498204-by-festool
https://beyondtools.com/products/12mm-14mm-beech-domino-xl-starter-systainer-set-498205-by-festool

[member=75933]luvmytoolz[/member] - thanks, but I got one of those sets when I bought my 700. Only really want the 500 set for the cutters.
 
Packard said:
My wallet, which is over 30 years old, and all the seams are holding, has outlasted the manufacturer’s embossed name on the inside flap.

But when I checked many years ago, they were out of business. Perhaps being on Rodeo Drive precipitated their demise. I paid $80.00 back the.  According to the Consumer Price Index, that’s $171.93 today.  But still, a good value.

But you never know in advance how long something will last.

And for those in the current Eurozone... the maximum banknote size might have increased, not fitting their pre-Euro mini-sized wallet. For the Dutch guilder the max bill height increased from 76 to 82 mm.
 
Coen said:
Packard said:
My wallet, which is over 30 years old, and all the seams are holding, has outlasted the manufacturer’s embossed name on the inside flap.

But when I checked many years ago, they were out of business. Perhaps being on Rodeo Drive precipitated their demise. I paid $80.00 back the.  According to the Consumer Price Index, that’s $171.93 today.  But still, a good value.

But you never know in advance how long something will last.

And for those in the current Eurozone... the maximum banknote size might have increased, not fitting their pre-Euro mini-sized wallet. For the Dutch guilder the max bill height increased from 76 to 82 mm.

Another argument against buying two wallets at a time.

Question:  Have you ever met or heard of a man buying two wallets at a time?  If your first wallet lasted just 3 years, would you know where you stashed the spare?

An amusing sidebar:

When Obama was running for President, one of his campaign promises was to outlaw plastic grocery bags.

At that time, I had just gotten a new retriever pup, and I used those bags (new, not re-used) to clean up after him.

With the source of new cleanup bags being threatened, I calculated how many bags I would need for an estimated 13 year lifespan. I purchased 15,000 bags.

Of course, Obama never made good on his promise to ban plastic grocery bags, and I felt pretty stupid having 15,000 of them in my garage.

The dog passed 4 years ago.  I still have around 1,500 left (a box and a half). At least I knew where I stashed those spares.  I guarantee the spare wallet would remain in some obscure safe place for it, not to be found when my current wallet disintegrated.
 
Coen said:
And for those in the current Eurozone... the maximum banknote size might have increased, not fitting their pre-Euro mini-sized wallet. For the Dutch guilder the max bill height increased from 76 to 82 mm.

The 1000DM note was the largest at 178mmx83mm.  The 500DM note was 170mmx80mm.  The largest Euro note is the €500 at 160mm x 82mm.  My DM-friendly wallet adapted to the Euro with no problem.  [big grin]
 
MikeGE said:
Coen said:
And for those in the current Eurozone... the maximum banknote size might have increased, not fitting their pre-Euro mini-sized wallet. For the Dutch guilder the max bill height increased from 76 to 82 mm.

The 1000DM note was the largest at 178mmx83mm.  The 500DM note was 170mmx80mm.  The largest Euro note is the €500 at 160mm x 82mm.  My DM-friendly wallet adapted to the Euro with no problem.  [big grin]

Wasn't it the DM1000 note from before 1995 that was 90mm tall  [tongue]?
 
My ETS-EC broke a couple of months back.  It runs just fine when not in contact with anything, but as soon as it touches the wood it slows and quickly stalls out.  I thought I might among the lucky/unlucky ones afflicted by the electronics problem that Festool announced a while back (and which they were fixing for free), since I bought mine fairly soon after they were released in 2015.  But after I sent it in Service said they would need $400 to fix it.

So I decided to spring for a new one, which makes this the first Festool I've ever replaced (outside of a faulty DF700 that broke on the first plunge, which was then replaced for free).
 
Coen said:
Wasn't it the DM1000 note from before 1995 that was 90mm tall  [tongue] ?

I don't know.  I was stationed in Germany in the 70's and used the previous version of the DM, but I don't remember seeing any denomination larger than 20 DM.  As I recall, even the 5 DM notes were scarce because the 5 DM coin was more popular.
 
ear3 said:
My ETS-EC broke a couple of months back.  It runs just fine when not in contact with anything, but as soon as it touches the wood it slows and quickly stalls out.  I thought I might among the lucky/unlucky ones afflicted by the electronics problem that Festool announced a while back (and which they were fixing for free), since I bought mine fairly soon after they were released in 2015.  But after I sent it in Service said they would need $400 to fix it.

So I decided to spring for a new one, which makes this the first Festool I've ever replaced (outside of a faulty DF700 that broke on the first plunge, which was then replaced for free).

What did they say was wrong with it?
 
I received my OF 1400 EBQ-Plus today.
This is a upgrade for my 23 year old Makita router.
 
me_two said:
I received my OF 1400 EBQ-Plus today.
This is a upgrade for my 23 year old Makita router.

It takes a second to get used to the difference in the feel of the handles, but it is definitely a major upgrade.
 
Have been watching a lot of Festool video’s. Sedge also has a lot of knowledge and tips.
And I have a lot of time to practice. 😀😀😀
 
His personality is not for me, but I do appreciate the information, especially the history

I agree.  It is like watching the "Three Stooges" which I never enjoyed even as a kid. 
 
Back
Top