What's wrong with this picture? (Winner by "TKO" Tom B.)

[iamnothim]

The correct answer has been given by an amalgam of five Foggies.
None were 100% correct.

 

[semenza]

The screws in the router bases have been swapped out. Hex screws for combination screws.

 

[tjbnwi]

Allen screws.

Tom

 

[iamnothim]

The screws in the router bases have been swapped out.

Read prior post

 

[iamnothim]

Allen screws.

Tom

Read prior prior post

 

[semenza]

The screws in the router bases have been swapped out.

Read prior post

See edit.

 

[tbellemare]

I think maybe, we should both consider some OCD therapy...

Tom

 

[iamnothim]

It looks like you switched all of the screws to one drive style or size.

Tom

Winner Winner, Chicken Dinner!!!!!

 

[BobcaygeonJim]

All screws have been swapped out with hex screws. Edit too late.... Good idea!

 

[iamnothim]

LR32 Plate
OF 1400 sole plate
OF 1400 edge guide
OF 1400 table widener
MFK 700 sole plate
Guide Rail extension bars

All are now ss HEX

The Prize?

A set of the fasteners.

 

[wow]

All screws have been swapped out for Torx.

 

[iamnothim]

All screws have been swapped out for Torx.

Sorry.

HEX

 

[tbellemare]

Can I please have a chicken dinner instead?

I really like Popeyes.

Tom

 

[wow]

Can I have the old fasteners? Never know when I might lose one and they'd come in handy?

 

[iamnothim]

So Tom is an automatic DQ for obvious reasons.

Anyone that answered fasteners send me a PM and I'll see if I can round up a complete set.

I have 2 more hex allen for the guide rail.

If you have one of the tools let me know.

This was a lot of fun and I never in a million years thought it would take this long !

There is a tray with screws in the background.

 

[tjbnwi]

LR32 Plate
OF 1400 sole plate
OF 1400 edge guide
OF 1400 table widener
MFK 700 sole plate
Guide Rail extension bars

All are now ss HEX

The Prize?

A set of the fasteners.

They are not hex heads, they are allen socket heads. You insert an allen key into them to turn them. Thus, a socket allen. A hex head is raised and a wrench or socket works against the flats or points, depending on the broach of the device. The height of the head is equal to the diameter of the bolt.

Tom

 

[iamnothim]

Can I please have a chicken dinner instead?

I really like Popeyes.

Tom

It was too much fun I will find a coupon..

 

[iamnothim]

LR32 Plate
OF 1400 sole plate
OF 1400 edge guide
OF 1400 table widener
MFK 700 sole plate
Guide Rail extension bars

All are now ss HEX

The Prize?

A set of the fasteners.

They are not hex heads, they are allen socket heads. You insert an allen key into them to turn them. Thus, a socket allen. A hex head is raised and a wrench or socket works against the flats or points, depending on the broach of the device. The height of the head is equal to the diameter of the bolt.

Tom

They are These.

 

[tjbnwi]

LR32 Plate
OF 1400 sole plate
OF 1400 edge guide
OF 1400 table widener
MFK 700 sole plate
Guide Rail extension bars

All are now ss HEX

The Prize?

A set of the fasteners.

They are not hex heads, they are allen socket heads. You insert an allen key into them to turn them. Thus, a socket allen. A hex head is raised and a wrench or socket works against the flats or points, depending on the broach of the device. The height of the head is equal to the diameter of the bolt.

Tom

They are These.

As your link shows, socket head allen screws.

These are hex bolts/screws;

http://www.fastenal.com/web/products/details/110120304;jsessionid=rqQjTq3J6f591K6dCtzsLMSyvLd155JLMLDyS0TbS3FhhLP1Wqvp!370588821!1063195835?searchMode=productSearch&zipcode=&filterByStore=&filterByVendingMachine=

Tom

 

[iamnothim]

Can I have the old fasteners? Never know when I might lose one and they'd come in handy?

Of course you can.

I need to order more from McMaster Carr.    I'll see what I can put together.

I kept scratching my head.  The edge guide for the OF 1400 had phillips  yet the LR32 router plate had slotted.  Both are M6
The edge guide for the MFK 700 uses slotted.

The sole plate for the MFK 700 are torx but the sole plate for the OF 1400 are phillips.  Both are M4
The fasteners for the OF1400 table widener are M4 slotted (I think)

Then there are the allen screws for the rail extenders.  Those are slotted, yet the same size fastener for the MFK real stops are "hex"

That bugged me....