Woodpeckers OneTime Tool - Festool MFT Layout & Assembly Square (US)

[Shane Holland]

Order the Woodpeckers OneTIME Tool MFT Square

$69.99

Woodpeckers newest OneTime Tool, the MFT Layout & Assembly Square enables quick and accurate setup of your Festool MFT table and enhances layout and assembly tasks. Specifically designed for setting perpendicularity between the Festool MFT fence and guide, the added MFT Positioning Dogs ensure alignment of your MFT rail or fence with the dog holes; inline at 90° or at 45°.

Act Now, Order Deadline Is Monday, January 29, 2018!

In addition to taming your MFT table the versatility of the Woodpeckers MFT Layout and Assembly Squares’ makes it a valuable addition throughout your shop. It is keenly adept at keeping large panels held firmly in place; ensuring perpendicular during dry fits and glue ups on cabinetry and other large projects.

It excels at setting 45°and 90°angles on your table or miter saw. If you have an 18” bandsaw, you can square the table to the blade with the square standing upright on its 3/4" wide leg, leaving your hands free to adjust and set stops. And wood glue is a breeze to clean off the phenolic surface, wet or dry. When not in use, the large clamping slots keep it hanging conveniently nearby on your shop wall.

And being machined from a single slab of American made phenolic, this tool is virtually indestructible. Drop it, hit it or soak it in water and it’ll still be rock solid and perfectly accurate.

Order the Woodpeckers OneTIME Tool MFT Square

 

[ishmerc]

That's not a bad price compare to other ones time tool .

 

[TinyShop]

Hmmm, why the relieved corners? Kind of tough to gauge the accuracy of something short (like a 210mm saw blade sticking up through a table) when a chunk of the face of the thing you're registering off of is missing.

And no mention of its accuracy or whether it features a lifetime guarantee (like other WP's gear).

Is more info forthcoming?

 

[Birdhunter]

I guess this one time tool is a cheaper alternative to the aluminum MFT square hanging off the side of my MFT.

Perhaps, sharp thin corners of a phenolic item would be more likely to mush if dropped or banged into something. The blunt corners would seem to be more durable.

In looking at this new square, I’m even happier with my old WP MFT square and my WP framing square. They both work well in my shop.

 

[RustE]

The 5 months is probably lead-time for sheet stock.  Then they probably won’t start running these until all can be done in one setup.  Don’t forget about inspection time.

One place I worked had a dedicated model shop that could turn out one-off and prototype products very in a matter of weeks.  Other places I’ve worked need several months just to schedule a machine to run one prototype.

 

[DynaGlide]

Is this item more for the convenience crowd? Currently using [member=1674]Peter Halle[/member] video using dogs. I take the fence off and use it as a spacer and align the rail to a set of dogs so as to not cut into the dog holes. Then once that's locked in I do the fence to another set of dogs. It isn't the most convenient but it works. The price isn't terrible when you factor in shipping costs of the Anderson Plywood unit. Although once you've setup a perfectly square MFT you could just cut your own 'square' out of thick plywood/MDF.

 

[buckeyeguy]

And no mention of its accuracy or whether it features a lifetime guarantee (like other WP's gear).

I called Woodpeckers directly this morning with the same questions. As of right now, they are guaranteeing .0085" per foot accuracy. The person I spoke with actually went out and talked with someone else to get the answer. She did say that they are still deciding on what machine they will be using to cut the square, so by actual production day, accuracy could be increased, but it is going to be at least .0085"/ft.

I also inquired about the lifetime warranty. This is backed by the lifetime guarantee for accuracy as long as it there doesn't appear to be user damage (i.e. running through the saw, fire). She did state all of their Woodpecker branded items are backed by the lifetime guarantee.

Lastly I asked if it was possible to purchase extra dogs in surplus to the two shown included. As of right now, there is no way to purchase extra.

As someone who does not own the larger MFT square, and factoring in the two extra dogs, this seems like a fair price for what it is.

 

[Shane Holland]

8.5/1000" accuracy per foot is garbage.

It looks like you're mixing units. Woodpeckers' accuracy is 0.0085" over a foot, or 0.04 degrees by my calcs.

 

[RustE]

Something is way off if 8.5/1000" per ft is the Woodpeckers' rating. If they can cut their aluminum squares to 1/1000" per ft then phenolic should be not different. Maybe they plan on using the red-headed step child CNC for this OTT.

Maybe they don’t want to grind it?

I have no idea how phenolic behaves when machining.  I’m going to take a guess that it’s close to machining aluminum, easy to cut and a bit ‘gummy’.

I got the same answer as Shane:  0.0085” (aka 8.5 thousandths) deviation across 12” is 0.04 degrees.  If my math is correct, that could translate to 0.030” deviation across a 42.5” span [1080 guide rail].

 

[mike_aa]

And no mention of its accuracy or whether it features a lifetime guarantee (like other WP's gear).

I called Woodpeckers directly this morning with the same questions. As of right now, they are guaranteeing .0085" per foot accuracy. The person I spoke with actually went out and talked with someone else to get the answer. She did say that they are still deciding on what machine they will be using to cut the square, so by actual production day, accuracy could be increased, but it is going to be at least .0085"/ft.

I also inquired about the lifetime warranty. This is backed by the lifetime guarantee for accuracy as long as it there doesn't appear to be user damage (i.e. running through the saw, fire). She did state all of their Woodpecker branded items are backed by the lifetime guarantee.

Lastly I asked if it was possible to purchase extra dogs in surplus to the two shown included. As of right now, there is no way to purchase extra.

As someone who does not own the larger MFT square, and factoring in the two extra dogs, this seems like a fair price for what it is.

[member=4284]rmh[/member]  and  [member=34727]Zeusman[/member]

What will the accuracy be for the new square?

 

[Cheese]

I think while they said .0085" per foot, I think they actually meant to say .0085º instead.

All of the rest of their machined items have been advertised to be within .0010" to .0015" or LESS per foot.

Using .0085" means this is 8.5 times less accurate than their previous offerings.

EDIT: I just checked the paperwork I received with my Woodpecker Model 6S Carpenters square and it reads accurate to .0085º.

 

[Cheese]

That's not a bad price compare to other ones time tool .

A lot of the price difference is the cost of the phenolic versus the cost of the cast aluminum tooling plate they use in their other tools.

The MIC 6 or ALCA 5 cast aluminum tooling plate is 2x-3X the cost of phenolic. 

 

[Woodtech28]

Hey Everyone, I just want to clear things up a bit...  This is Ed from Woodpeckers and this is my tool. 

First: The accuracy statement.
This is for degrees, so the ".0085" is .0085 degrees per foot.  Typically, the metal squares run much truer than that, but that is the max tolerance.

The MFT Layout & Assembly tool:
In the prototype stages, the MFT Layout & Assembly Square is right there, running about .008 to .009 “Degrees” over the 15” length. 

 

[Cheese]

In the prototype stages, the MFT Layout & Assembly Square is right there, running about .008 to .009 “Degrees” over the 15” length.

Good to hear...thanks for weighing in.  [smile]

 

[RustE]

...

First: The accuracy statement.
This is for degrees, so the ".0085" is .0085 degrees per foot.  Typically, the metal squares run much truer than that, but that is the max tolerance.

...

What about the position of the dog holes with respect to the edges?  Hopefully +\- 0.005” or better.

 

[buckeyeguy]

Hey Everyone, I just want to clear things up a bit...  This is Ed from Woodpeckers and this is my tool. 

First: The accuracy statement.
This is for degrees, so the ".0085" is .0085 degrees per foot.  Typically, the metal squares run much truer than that, but that is the max tolerance.

Well, I guess my credibility just took a hit on here [big grin]

Since it was a new tool offering the person I talked to (who was very pleasant to talk to) wasn't sure of the specifics yet and had to put me on hold to ask. I took the "8 and a half thousandths per foot" as inches and not degrees. My bad. Sorry for the confusion.

Thanks for clearing that up!

A couple of questions for anybody here.

In general, does phenolic material have any tendencies to warp due to heat in the .75" thicknesses? When I refer to heat, I am referring to an non air-conditioned garage which can get quite hot in the summer months.

Also, is phenolic material resistant to wood glue such as the Titebonds (I, II, III)?

 

[promark747]

Hey Everyone, I just want to clear things up a bit...  This is Ed from Woodpeckers and this is my tool. 

First: The accuracy statement.
This is for degrees, so the ".0085" is .0085 degrees per foot.  Typically, the metal squares run much truer than that, but that is the max tolerance.

The MFT Layout & Assembly tool:
In the prototype stages, the MFT Layout & Assembly Square is right there, running about .008 to .009 “Degrees” over the 15” length.

Thanks Ed.  Would you say the better accuracy for the metal squares is due to the material itself or additional machining (grinding, etc)?

 

[Svar]

This is for degrees, so the ".0085" is .0085 degrees per foot. 

If this is degree, than why "per foot"? It's either deviation per distance (for example, inch per foot), or simply angle (deg.)

 

[tomp]

This is for degrees, so the ".0085" is .0085 degrees per foot. 

If this is degree, than why "per foot"? It's either deviation per distance (for example, inch per foot), or simply angle (deg.)

Agreed. It's either made within an accuracy of .0085° or with a deviation of .0085" per foot. The total error would be based on the length of the part - at .0085"/per foot, the error would be .017" for a 2' part, .0255" for a 3' part and so on. Degrees per foot is meaningless. BTW, an accuracy of .0085° would give an error of .0036" at a length of 24" - pretty accurate I would say.

 

[Sparktrician]

My concern is that it's only 3/4" thick.  If you're working with 3/4" material, you have to lower the rail to calibrate it, but in raising the rail to accommodate the 3/4" (or 18mm, or 19mm, or whatever) material, the act of releasing the rail clamp and resetting it to a different height is likely to induce an error, however minor.  If Woodpeckers had chosen to make it thicker, say 1-1/8" (like the original MFT square), one could zero the rail and not be concerned about errors induced by raising and/or lowering the rail once it's been zeroed.  This rather makes the argument about "the '.0085" is .0085 degrees per foot'" insignificant.