Your Thoughts on a Used OF1010 EQ?

[onocoffee]

Came across a used OF1010 EQ that, from the pics, looks in pretty decent condition considering it's a pretty old tool. But it is old and the seller could not locate a manufacturer's plate on it (I don't think she knows where it is on this tool - and neither do I). The tool is in a Classic Systainer so I'm presuming it's no younger than 2011 - and it's a generation or two old. However, it is being offered with an FS2424 LR 32 rail. Original asking price for both was $550. I asked if she'd be open to offers and she reduced the asking price to $375. Personally, I think that's still a bit optimistic, but I'm interested to learn your opinions on this.

Thanks.

 

[luvmytoolz]

So long as the bearings aren't squealing I'd consider that not too bad, especially with the LR32 rail, looks in pretty good nick. The OF1010 kit is $1200 for us here though, not sure how much cheaper it is for you new.

 

[onocoffee]

@luvmytoolz Here in the US, the current generation OF1010 REBQ is $635. For me, the utility of a 2424mm rail is not as great since I don't really work with sheet material.

 

[Ebuwan]

i dunno, taking that money and putting it toward a new one, spread that money out over years you would be using it, i'd go with the new one. NOW, it is possible that old one would be just as fine for all those years too, part of the buying used stuff game i guess.

 

[Crazyraceguy]

The first thing I see, is that the insert is different. The T-loc version lays the opposite way, with the handle to the right.
Unless it's just jambed in there incorrectly?
I don't really remember an update too the OF1010, until the recent one, where it is much more like OF1400.
That might have just been the move to T-loc, which would have needed a new insert anyway (and a new SKU)
I would be more interested in the FS2424. They are not exactly plentiful. They may discontinue that next

 

[P_K]

$375 is decent for the set. Which length LR32 rail? The longer one goes for around $430 these days.

 

[peter halle]

I don't remember any changes to the 1010 over time until the recent changes. As already mentioned, the systainer and the insert were changed. I also think that the scope of delivery (items included with it in the systainer) may have changed slightly, but then again that wouldn't be a big deal for me.

Peter

 

[Cheese]

The 1010 was released in 2005 and has not changed until the recent release of the 1010 R.

 

[onocoffee]

i dunno, taking that money and putting it toward a new one, spread that money out over years you would be using it, i'd go with the new one. NOW, it is possible that old one would be just as fine for all those years too, part of the buying used stuff game i guess.

I would rather have the new one, but if it's possible to get a good deal on this one, it would suffice. That being said, I'm not necessarily pressed to get another router at the moment, which is why I'm not bullish on it.

 

[jeffinsgf]

If you have any intentions of ever using the LR-32 system, that is a steal of a deal...and kind of is anyway. I have the generation just prior to yours (I believe). It's even a different model number...OF-1000 instead of 1010. At work, I have a 1010 that is the last generation before the new one just released. I swear I could switch parts on the two and never know it. Mine didn't have Plug-It originally, but I added it. And I think the 1010 has a higher amperage rating, but I'm not sure about that. Every accessory released for the 1010 until this most recent model change fits my old OF-1000, so other than the latest and greatest, you have nothing to worry about in terms of stuff not fitting.

For the sake of a light, I wouldn't pass on it and spend twice as much. But that's just me.

Not using sheet goods now doesn't mean you won't ever. That long rail would be calling my name.

 

[Michael Kellough]

If you have any intentions of ever using the LR-32 system, that is a steal of a deal...and kind of is anyway. I have the generation just prior to yours (I believe). It's even a different model number...OF-1000 instead of 1010. At work, I have a 1010 that is the last generation before the new one just released. I swear I could switch parts on the two and never know it. Mine didn't have Plug-It originally, but I added it. And I think the 1010 has a higher amperage rating, but I'm not sure about that. Every accessory released for the 1010 until this most recent model change fits my old OF-1000, so other than the latest and greatest, you have nothing to worry about in terms of stuff not fitting.

For the sake of a light, I wouldn't pass on it and spend twice as much. But that's just me.

Not using sheet goods now doesn't mean you won't ever. That long rail would be calling my name.

Jeff is right, I have an OF-900 and two OF-1000. They’re all the same, including the OF-1100 except for increasing wattage. Included accessories varied with time of release but the machines are the same.

Also agree that it’s a very good deal at that price.

 

[Coen]

Unless it's just jambed in there incorrectly?

No mine in classic Systainer also has the front handle on the right.

I don't really remember an update too the OF1010

If I remember right the 2003 catalog had it listed at 22.000 rpm, the one I bought in 2004 has 23.000 on the label and the next catalog had it listed as 24.000
No clue if there is an actual difference.

The accessories supplied with it have also changed over time and across regions.

But it is old and the seller could not locate a manufacturer's plate on it (I don't think she knows where it is on this tool - and neither do I).

It's on the motor housing, below and forward of the switch.

@luvmytoolz Here in the US, the current generation OF1010 REBQ is $635. For me, the utility of a 2424mm rail is not as great since I don't really work with sheet material.

And if you it's still too short to cut 2440 sheets and too long really for cutting 1220.

---

Well, I don't have a complete accurate feel for US prices, but $375 for the OF-1010, the Toolie (!) and a FS 2424/2-LR 32 sounds good. Or is a rail that predates the /2?

 

[Hawkeye0001]

If it's well cared for (which it certainly looks like!) they last forever. One of my OF 1400's is the oldest tool I own at 21 years of age, still going strong, they're bullet proof designs (the OF 1010 even more so given that its predecessors date back to the late 80's without much change to the dynamic components)
Pricewise it'd be an absolute steal even for Europe considering that this rail usually costs the same as the machine itself.
If you can test it on site check for any bearing noises and free movement of the collet threads, if that's all okay I'd say go for it.

 

[luvmytoolz]

@luvmytoolz Here in the US, the current generation OF1010 REBQ is $635. For me, the utility of a 2424mm rail is not as great since I don't really work with sheet material.

I reckon it would still definitely be worth buying, and if you are sure you can't use the rail, sell it and reduce the cost of the router further.

The handle grip on the OF1010 is fantastic for allowing one handed operation very comfortably, highly worth getting just for that aspect.

 

[MacBoy]

It’s a bundle I would like to buy.

However, if you don’t have the Festool LR32 kit or a 3D printed plastic clone, then it is less appealing for you.

I just finished making systainer shelving with 6” strips of plywood. Used the OF 1010 to bore a bajillion shelf pin holes with the LR32 kit. (I might post it, but it’s a very ordinary project for the folks on here)

What did you decide?

 

[Cheese]

It’s a bundle I would like to buy.

However, if you don’t have the Festool LR32 kit or a 3D printed plastic clone, then it is less appealing for you.

I just finished making systainer shelving with 6” strips of plywood. Used the OF 1010 to bore a bajillion shelf pin holes with the LR32 kit. (I might post it, but it’s a very ordinary project for the folks on here)

What did you decide?

Please post...we all enjoy looking at completed projects that others produce.

 

[Crazyraceguy]

I just finished making systainer shelving with 6” strips of plywood. Used the OF 1010 to bore a bajillion shelf pin holes with the LR32 kit. (I might post it, but it’s a very ordinary project for the folks on here)

Please post...we all enjoy looking at completed projects that others produce.

Yes, please do. It is cool to see the differences in what we all make.