Adapter to use A Domino with a Fein Turbo II Vac?

[Johns Woodshop]

Is there an adapter that would allow me to use my Fein Turbo II vac with my Domino?

Thanks!
John

 

[hhh]

Fein makes a step adapter that works pretty well with FT kit

 

[Johns Woodshop]

Fein makes a step adapter that works pretty well with FT kit

Thank You!

 

[polarsea1]

You can plug a Festool hose (you won't need antistatic) right into a Fein vac. From personal experience I felt the Fein adaptor was awkward to use. 

 

[scoffelt]

Before I had my Festool Vac, I used a Fein all the time.  I bought several of the adapters and cut them down to size.  On some tools (i.e., ATF), I attached the adapter and then ran some electrical tape around to ensure they stayed attached.  I never had a bit of problem with the hose or adpater coming loose during use.  The adpaters were like $2.99 fro Woodcraft, so pretty cheap fix.

 

[AdamM]

I imagine this is the adaptor others are talking about.  I used it to adapt my Domino to a Ridgid vac before getting a CT and it worked quite well.  Considering it's a Fein product, I'd be shocked if the larger end doesn't fit their hoses.  [smile]

http://www.woodcraft.com/Catalog/ProductPage2.aspx?id=2021144&ProdId=30399&

 

[jtwood]

I had my Fein vac before I got into Festool.  I now have several sanders, a TS75, Domino, etc., and they all work fine with the adapter Fein adapter.  It is semi-soft rubber, rather than hard plastic, and can be shortened to fit the tools.  I bought about 3 of them, but seem to use the same one all the time.

 

[Sean7a]

I imagine this is the adaptor others are talking about.  I used it to adapt my Domino to a Ridgid vac before getting a CT and it worked quite well.  Considering it's a Fein product, I'd be shocked if the larger end doesn't fit their hoses.   [smile]

http://www.woodcraft.com/Catalog/ProductPage2.aspx?id=2021144&ProdId=30399&

I found this adapter one early morning (maybe 2 AM) browsing Amazon for new items to stock.  Honestly, one of my proudest business moments.  That thing is a JEWEL. 

Please note, this is an embarrassing story.

 

[rmwarren]

Not sure if this will work but I use one to adapt a common hose (orange Mr. Nozzle) to fit Festools. The smaller end is identical to the connector on my 27MM Festool hose.

[attachthumb=#]

http://www.industrialvacs.com/Tool_Socket_connects_suction_hose_to_power_tool_p/h302000535.htm

RMW

 

[Johns Woodshop]

I imagine this is the adaptor others are talking about.  I used it to adapt my Domino to a Ridgid vac before getting a CT and it worked quite well.  Considering it's a Fein product, I'd be shocked if the larger end doesn't fit their hoses.   [smile]

http://www.woodcraft.com/Catalog/ProductPage2.aspx?id=2021144&ProdId=30399&

That is the one I got and it worked flawlessly!

Thanks for all the input!
John