Woodwork Wizard
Member
- Joined
- Oct 25, 2013
- Messages
- 431
CMS table saw with vertical and horizontal feather boards. The feather boards are UJK brand and were purchased from Axminster for just over a tenner for a pair.
The rip fence is locked in place with two Festool angle stops instead of one so it is absolutely rigid.
The table extensions were made using two Kapex crown stops, two 6' lengths of plywood and an unused ladder which is a great source of aluminium box section and the grippy rubber foot on the ladder is ideal for a leg. Total length of the entire set up is 14' so there's plenty of material support for longer pieces and because everything attaches to the CMS V-grooves it can all be assembled very quickly. Great for ripping or rebating long narrow pieces and with the CMS OF module and 2200 it's also a great router table too. With a DIY base for the CMS it is totally rock solid. All it needs now is a micro-adjust for the rip fence...
The rip fence is locked in place with two Festool angle stops instead of one so it is absolutely rigid.
The table extensions were made using two Kapex crown stops, two 6' lengths of plywood and an unused ladder which is a great source of aluminium box section and the grippy rubber foot on the ladder is ideal for a leg. Total length of the entire set up is 14' so there's plenty of material support for longer pieces and because everything attaches to the CMS V-grooves it can all be assembled very quickly. Great for ripping or rebating long narrow pieces and with the CMS OF module and 2200 it's also a great router table too. With a DIY base for the CMS it is totally rock solid. All it needs now is a micro-adjust for the rip fence...