CT 33, Boom Arm, CT Handle and MORE!

[nickao]

CT 33 and Boom Arm

This CT 33 is pristine and has only 1 hour "on" time, max. The boom arm has been assembled, but again used for about an hour. These are my backups at my second table. I sold the second table and decided to sell these because I just never use them enough. Especially now with the second large table gone I have no use for them.

I just do not think you will be able to tell this unit was ever used and if I had an original box it would easily pass as brand new.

If all are purchased together I will add some extras: Comes complete with a Festool electrical "plug it" cord, ready to go. Just plug in and attach a sander. I will toss in a couple of  new bags and Festool  brand "Y" adapter as well.The Festool vac hose is also included.

Festool Ext plug it cord   Retail - 35.00

Y Festool Adapter           Retail - 31.50

CT 33 Vac -                     Retail - 522.00

Boom arm                        Retail - 250.00

CT Handle                        Retail  - 70.00

Two sander Holder         Retail - 66.00

All for 674.50                 Retail - 974.50

30 day return for any reason guarantee. This stuff looks and works like new.

 

[robtonya]

Hurry up and sell this! Too tempting for me.

 

[Ken Nagrod]

I think you should also make him an Eggbot egg.

 

[robtonya]

I had to look up eggbot, wasnt sure what you were talking about. Now I want one! Seriously, I'd be all over the CT-33 and acc, but I've got money put back for a new roof when it warms up. I don't know how I'd try to use this in a roof repair, and explain it to my wife  [scared]. If it isn't gone in a couple weeks, I will get with you on it though.

 

[Ivan T]

PM sent regarding purchase.

 

[nickao]

Okay I have a second set up and I decided to sell it.     SOLD first set up.

I have one more set up like this for the same price., the only difference is I have no Festool Y adapter for it, but I still have the extra cord and I will toss in a Fein Y adapter that you can get to work with a bit of fiddling around. This unit has closer to 4 hour run time on it. The included 1 1/4" Festool hose is a bit more used, not new out of the box looking , but is  functionally new. I did put about 4 hours on that hose.

Festool Ext plug it cord   Retail - 35.00

Y Fein Adapter (not an exact fit) Retail - 31.50  ?

CT 33 Vac -                     Retail - 522.00

Boom arm                        Retail - 250.00

CT Handle                        Retail  - 70.00

All for 650.00 b]              Retail - 908.00

I still have the large MFT table as well:

http://festoolownersgroup.com/classifieds/82%27-x-48%27-mft-1080-style-extrusions/

This is my bottom line price.

 

[Splint Eastwood]

Okay I have a second set up and I decided to sell it.     SOLD first set up.

I have one more set up like this for the same price., the only difference is I have no Festool Y adapter for it, but I still have the extra cord and I will toss in a Fein Y adapter that you can get to work with a bit of fiddling around. This unit has closer to 4 hour run time on it. The included 1 1/4" Festool hose is a bit more used, not new out of the box looking , but is  functionally new. I did put about 4 hours on that hose.

Festool Ext plug it cord   Retail - 35.00

Y Fein Adapter (not an exact fit)          Retail - 31.50  ?

CT 33 Vac -                     Retail - 522.00

Boom arm                        Retail - 250.00

CT Handle                        Retail  - 70.00

Two sander Holder         Retail - 66.00

All for 674.50                Retail - 974.50

I still have the large MFT table as well:

http://festoolownersgroup.com/classifieds/82%27-x-48%27-mft-1080-style-extrusions/

This is my bottom line price.

Not having follow your sales, I have one question:  Do you need to sell as an entire unit/package?  Or would you consider, selling CT 33 separate from Handle, etc.....?

TIA
Matt

 

[nickao]

No, in this case its all or nothing.

The unit is all set up and I will only take it apart and package it up if everything gets sold at once.

I am in the process of packaging up the first set up I already sold right now and it is best it all gets packed together. The shipping on individual parts would not make it worth my while to sell.

The current CT 33 I have does not have the Two sander holder included. I adjusted the asking price to 650.00.

 

[nickao]

SOLD