Naildrivingman
Member
- Joined
- Apr 8, 2017
- Messages
- 509
I assembled a table top last night and upon glue-up, I had some of the edges out of plane. The top measures 24" x 42". The boards run the short dimension. I used 3 8mm x 40mm dominos per seam. I spaced the dominos at 4", 12" & 20". Should I have added an additional domino or should I have used a spacing more along the lines of 2", 12" & 22"? The difference in plane is less than 1/32" and can easily be flattened with my Rotex 150. I just don't want to make the same mistake twice.
Thanks,
Chris.
Thanks,
Chris.