ear3
Member
- Joined
- Jul 24, 2014
- Messages
- 4,341
I'm reviving this thread to ask for some follow up advice on upgrading my grizzly + Dust Deputy system with a filter:
[attachimg=1]
The bag attached to the Grizzly allows fine particles to escape, and so the other side of my garage/shop that gets used for storage is constantly coated with a thick layer of dust. So I want to attach a filter to the system to replace the bag. The question is which one. In one of the pics posted in this thread by Fogger [member=61571]X[/member], you'll see a fairly short filter with a bag on the bottom:
[attachimg=2]
When I go to the Wynn, site, they recommend for a cyclone system a taller 13F filter:
https://wynnenv.com/products-page/cyclone-filter-pricing/13f230nano/
Which you can see an illustration of here:
https://wynnenv.com/fabricate-wall-bracket/
I'm curious about a couple of things.
1. Why in the picture does one of them have a bag but the other doesn't? Is the bag optional/extra? Presumably, I could also add a filter pan to the bottom of the 13F in place of the bag, as described in this Stumpy Nubs video.
2. What is the difference between what [member=61571]X[/member] has and the 13F filter?
3. The gasket for the 13F filter is 11.25 ID -- how then do I mate the exhaust port of the Grizzly with the filter?
[attachimg=1]
The bag attached to the Grizzly allows fine particles to escape, and so the other side of my garage/shop that gets used for storage is constantly coated with a thick layer of dust. So I want to attach a filter to the system to replace the bag. The question is which one. In one of the pics posted in this thread by Fogger [member=61571]X[/member], you'll see a fairly short filter with a bag on the bottom:
[attachimg=2]
When I go to the Wynn, site, they recommend for a cyclone system a taller 13F filter:
https://wynnenv.com/products-page/cyclone-filter-pricing/13f230nano/
Which you can see an illustration of here:
https://wynnenv.com/fabricate-wall-bracket/
I'm curious about a couple of things.
1. Why in the picture does one of them have a bag but the other doesn't? Is the bag optional/extra? Presumably, I could also add a filter pan to the bottom of the 13F in place of the bag, as described in this Stumpy Nubs video.
2. What is the difference between what [member=61571]X[/member] has and the 13F filter?
3. The gasket for the 13F filter is 11.25 ID -- how then do I mate the exhaust port of the Grizzly with the filter?
