six-point socket II
Member
- Joined
- Jun 26, 2016
- Messages
- 2,219
Hi,
So over the course of the day all screws arrived.
Festool (coarse) collated drywall screws (I had those), Adunox collated OSB/plywood screws (given to me by Adunox), Hilti (coarse) collated screws, Hilti (fine) self-drilling drywall screw, Hilti (fine) drywall screw. (All Hilti screws given to me by private party).
I pretty much expect all of the drywall screws to either fail or give me real trouble. Except for the Hilti maybe because they especially advertise these for wood/wood applications. We shall see. Especially because they seem to be pretty much identical to the Festool screws. The Adunox should work like a charm - but we're going to see that, too.
I couldn't get any collated Spax, they were out and would only produce them if I order 40.000 screws... in hindsight this was a blessing because they only make them for the "Coil"-System so I couldn't have used them anyway with the DWC.
I built this little "wall"
I have a lot of sanding and painting planned for tomorrow, but I will try to squeeze the DWC run in between so I can upload the video on Sunday.
Kind regards,
Oliver
So over the course of the day all screws arrived.


Festool (coarse) collated drywall screws (I had those), Adunox collated OSB/plywood screws (given to me by Adunox), Hilti (coarse) collated screws, Hilti (fine) self-drilling drywall screw, Hilti (fine) drywall screw. (All Hilti screws given to me by private party).
I pretty much expect all of the drywall screws to either fail or give me real trouble. Except for the Hilti maybe because they especially advertise these for wood/wood applications. We shall see. Especially because they seem to be pretty much identical to the Festool screws. The Adunox should work like a charm - but we're going to see that, too.
I couldn't get any collated Spax, they were out and would only produce them if I order 40.000 screws... in hindsight this was a blessing because they only make them for the "Coil"-System so I couldn't have used them anyway with the DWC.
I built this little "wall"


I have a lot of sanding and painting planned for tomorrow, but I will try to squeeze the DWC run in between so I can upload the video on Sunday.
Kind regards,
Oliver