Hinge machine dust collection
- Thread starter WPeters
- Start date
I use Loc Line 2 1/2" as permanent fixtures that I can then attach my vac hoses. http://www.loc-line.com/product-category/2-5-vacuum-hose/anti-static-vacuum-hose
I had to dig out my Mini-press last night for a couple of doors and remembered this thread....
Took me a while to come up with something that worked decent, because of the air blast throwing the chips all over.
There is a 4" pvc (sch 40) street "L" mounted under the back of the press with a short piece of pipe going out the back for the hose coupling.
Small blocks of wood wedged in between the press frame rails, both in front & behind the elbow opening to stop air from coming in. A guard made from 1/4" luann surrounds the back to keep chips close so the dust collector gets them.
The last pic shows what was on the table after 6 holes.
Ed
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
[attachimg=7]
Took me a while to come up with something that worked decent, because of the air blast throwing the chips all over.
There is a 4" pvc (sch 40) street "L" mounted under the back of the press with a short piece of pipe going out the back for the hose coupling.
Small blocks of wood wedged in between the press frame rails, both in front & behind the elbow opening to stop air from coming in. A guard made from 1/4" luann surrounds the back to keep chips close so the dust collector gets them.
The last pic shows what was on the table after 6 holes.
Ed
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
[attachimg=7]
