I need a source for 14 inch 350mm full extension euro slides

[UncleJoe]

I am building a MFT/Sysport and I want to use full extension euro slides similar to the ones in the Guido Henn Chaos video. I would have thought this would be easy to find. Wow was I surprised, I can find the Blum ones but they are really expensive. I can find all sorts of low cost partial extension but I need 14" so I can open the systainer while on the drawer. It seams everyone is using ball bearing and I may have to do that but for a sysport it sure looks like the way Guido did his saves the most room and is a clean and simple way to do it.

Thanks for your help.

 

[bruegf]

I made my sysport deeper and then used low cost 3/4 extension slides.  The shelf pulls out far enough that the systainer opens fully and I use the extra space behind the systainer for storage of things I don't nee to get to often like extra boxes of sandpaper, etc.  Plus the extra depth made my 6' tall sysport more stable.

Fred

 

[UncleJoe]

I was just thinking the same thing. I think the 16 inch partial extension will work I loose about 2.5 inches so I should be ok

 

[sgryd]

Slides
[wink]

 

[Sparktrician]

I ordered mine from Rockler. 

[smile]

 

[ericbuggeln]

Gliderite, look on Amazon and Ebay for free shipping deals, Eric

 

[DKurzweil]

Woodworkers hardware has some that I just used for a sysport, and they are priced right. 

I used the 15.75 inch full extension, the 13.75 will not be long enough for a t-loc to stay open.

Here's the link:  http://www.wwhardware.com/kv-tt100-economy-100-lb-full-extension-drawer-slide-kvtt100/

They are cheap in cost, but they are very sturdy and outperform my expectations.

Hope it helps,
Daniel

 

[billg71]

Try HGH Hardware Supply. They're really reasonable on pricing and carry most of the Blum line.

Don't know which slide you're referencing but it wouldn't hurt to give them a call.

HTH,
Bill

 

[Jeramy]

For my sysport I used 14" Topslide Series 757 Over-Travel slides throughout.  Rockler item #29005.  They're working well for me, and are strong enough to support heavier equipment (I have a Tormek T-7 and accessories on one of the shelves).

 

[tiralie]

Hafele has the 3/4 Extension 14"/350mm for 2.31 a pair.3/4" slides
Tim

 

[Eoghan Brown]

I ended up buying a case of these. For my systport. worked very well.

Slides.

 

[Wooden Skye]

GlideRite would be my recommendation.  You buy a 10 pack of 14" with 1" over travel for $33.  This is for 100lb rating.

 

[UncleJoe]

GlideRite would be my recommendation.  You buy a 10 pack of 14" with 1" over travel for $33.  This is for 100lb rating.

That sounds like a great deal.Where can I find these at this price?

 

[Theshipstore]

Glide Rite draw slides can be purchased directly from the company in factory 10 packs

Gliderite.com should get you there with no problems

Sal

 

[UncleJoe]

Thanks. Duh I searched for dealers instead of the company that actually makes the stuff. What a concept... Sell what you make directly to the customer.  [embarassed]