It's Finally here... The Precision Plate for Incra Positioners!!

[bkharman]

A couple more iphone photos of just the plate:

 

[cje]

That or drilling new holes, if possible. Importing new base is quite pricey around here unfortunately. Usually around $90 shipping + import tax on the total amount. Rough estimate that part would cost me x10  [scared]
Nice product, but kind of an oversight they didnt take compatibility into account though
Maybe they can make updates in a future production run, but wishful thinking probably.

There is a dutch reseller of Incra, that might be more convenient for you to import from...

Best, Karel

The company that made the plate is a small US based company. I had the link in my original post as well as slappy posted it.

They do ship international as well. I would email him questions about going through a regional Incra distributor.

Enjoy!

I was referring to the new baseplate for his Incra that Jonathan was considering, not the precision plate.

 

[bkharman]

That or drilling new holes, if possible. Importing new base is quite pricey around here unfortunately. Usually around $90 shipping + import tax on the total amount. Rough estimate that part would cost me x10  [scared]
Nice product, but kind of an oversight they didnt take compatibility into account though
Maybe they can make updates in a future production run, but wishful thinking probably.

There is a dutch reseller of Incra, that might be more convenient for you to import from...

Best, Karel

The company that made the plate is a small US based company. I had the link in my original post as well as slappy posted it.

They do ship international as well. I would email him questions about going through a regional Incra distributor.

Enjoy!

I was referring to the new baseplate for his Incra that Jonathan was considering, not the precision plate.

My bad Karel...  Trying to read this on a smartphone screen doesn't always work so well! 

 

[RC]

Oh, duh! They do ship internationally, but not to Finland - at least from their shopping cart. I've contacted both Precision Dogs and Dieter about this issue... Lets see who's quicker ;-)
Edit: Well, both Dieter and Jerry got back to me promptly and Jerry added Finland to the list of shipping countries... and wait for it... sold-out with the plates before I managed to order one... [doh]
Well, at least I have placed my order for my metric LS25 Superfence kit + router bit selections from Dieter and once Jerry gets more plates in stock I'll get the plate... haven't ordered the MFT-VL yet so no major rush... just a bit of a D'oh moment Homer style  [tongue]

 

[sgryd]

I payed USD 32 for USPS First Class (1-3 days) shipping to Sweden.

 

[bkharman]

Oh, duh! They do ship internationally, but not to Finland - at least from their shopping cart. I've contacted both Precision Dogs and Dieter about this issue... Lets see who's quicker ;-)

Reiska,

I am glad you posted, you were one of the people I thought of when this came out!  I do hope you end up with one as it is a solid interface. I know you have limited (indoor) space to work with so getting your LS on and off the table quickly is key.

Let me know who responds first! 

 

[Slappy]

that's the beauty of this whole design is the speed in set-up & then removing the LS positioner from the table all the while of being absolutely Square with no need to adjust anything to be square .
I was working on building my own design but was hung up on getting a absolute square jig outta my own limited tooling in my shop .
I had gotten the all materials I needed & was proceeding forward but when this hit , I added up all $$$ I had in material costs , this plate was near that figure .
with any mistake or slight flaw in my design that would have put me over in costs of materials & some AL plate stock with holes in it  [sad] I couldn't use .
the materials I have can now be re-purposed but couldn't be used  IF I had flawed in any way .
I got a shipping notice a hour after I ordered , I should have it in hand tomorrow 
as they ship from La La Land  [cool]

 

[b_m_hart]

Got over my loathing of PayPal and ordered... got shipping and tracking info within an hour or so!

 

[bkharman]

Got over my loathing of PayPal and ordered... got shipping and tracking info within an hour or so!

I am not the biggest PP fan either (and I contract with them!) but I am glad you are picking one up...  I am shooting a quick video how well it works and will have it up In a few.

EDIT: Here is the video I made demonstrating how easy it is to "set and forget" this plate... One handed no less!!

 

[bkharman]

Bump for video add above.

 

[iamnothim]

I truly want one for my CMS/VL.
Dust collection is the only rub.

 

[bkharman]

I truly want one for my CMS/VL.
Dust collection is the only rub.

Hey there.  Dust collection is superb with the LS fence.  I didn't show it on my pics, but the large 36mm hose connects to the side of the LS and collects through the fence itself.  The smaller hose still connects through the router under the table.  Dust collection is nearly as good as the OOTB fence that comes with the CMS.

Do you have an LS currently?  Or are you looking at getting one?

cheers.  Bryan.

 

[iamnothim]

I've got a pair of MFT/3's and a CMS/LS
Thanks for the clarification on the dust collection.

It would greatly reduce the CMS fence setup time.
Very tempting.

 

[bkharman]

I've got a pair of MFT/3's and a CMS/LS
Thanks for the clarification on the dust collection.

It would greatly reduce the CMS fence setup time.
Very tempting.

Which CMS do you have?  The VL or the GE?  If you have the VL, the setup works very well. I will take a pic or two of the dust connection when I get home. Like I said, it works really well but there could be some improvement.

 

[richk]

What would be the best way to connect the MFT/3 to the CMS Model GE?

 

[cgmojoco]

Nice product!

 

[bkharman]

What would be the best way to connect the MFT/3 to the CMS Model GE?

I don't have a GE, but I believe you can use the same MFT to MFT connectors. Hopefully someone with an MFT can speak up.

That being said, the width of the MFT and the width of the CMS-GE are different so it might be a little challenging. Just an FYI.

Cheers. Bryan.

 

[iamnothim]

I've got a pair of MFT/3's and a CMS/LS
Thanks for the clarification on the dust collection.

It would greatly reduce the CMS fence setup time.
Very tempting.

Which CMS do you have?  The VL or the GE?  If you have the VL, the setup works very well. I will take a pic or two of the dust connection when I get home. Like I said, it works really well but there could be some improvement.

I guess I don't have an "LS". [huh]  duh

Mines a "VL"  Better yet....  It's the one that connects to an MFT/3  [big grin]

 

[bkharman]

I've got a pair of MFT/3's and a CMS/LS
Thanks for the clarification on the dust collection.

It would greatly reduce the CMS fence setup time.
Very tempting.

Which CMS do you have?  The VL or the GE?  If you have the VL, the setup works very well. I will take a pic or two of the dust connection when I get home. Like I said, it works really well but there could be some improvement.

I guess I don't have an "LS". [huh]  duh

Mines a "VL"  Better yet....  It's the one that connects to an MFT/3  [big grin]

Perfect!  Then if you get the Incra LS (either the 17 or 25) you are all setup!  I also have the CMS that only has two legs and attaches to the MFT.

Let me know if you are headed that route. I can definitely give you some ideas of how it can help out. I really like my setup, but I will say it isn't for everyone.

 

[Slappy]

I've got a pair of MFT/3's and a CMS/LS
Thanks for the clarification on the dust collection.

It would greatly reduce the CMS fence setup time.
Very tempting.

Which CMS do you have?  The VL or the GE?  If you have the VL, the setup works very well. I will take a pic or two of the dust connection when I get home. Like I said, it works really well but there could be some improvement.

I guess I don't have an "LS". [huh]  duh

Mines a "VL"  Better yet....  It's the one that connects to an MFT/3  [big grin]

Perfect!  Then if you get the Incra LS (either the 17 or 25) you are all setup!  I also have the CMS that only has two legs and attaches to the MFT.

Let me know if you are headed that route. I can definitely give you some ideas of how it can help out. I really like my setup, but I will say it isn't for everyone.

you can use a 32" LS , I ordered one with the base for the router LS positioner  all you do is call Incra @ Incrementaltools.com & they will install the router base plate on a 32"  TS positioner
order this http://www.incrementaltools.com/INCRA_LS_32_Range_Positioner_ONLY_p/ls32.htm
& then ask that the other base be installed on it
I have both the 17" & 32" with the bolt on base