- Joined
- Apr 19, 2015
- Messages
- 38
Hey, guys if anyone is interested I have designed this which I will be putting on my website (www.benchdogs.co.uk) This will be available in the next week or 2. Can be used for the Festool or Incra fences.
sprior said:When I started this thread the thought of designing and 3D printing my own hadn't yet occurred to me, but here we are. I have published the files to Thingiverse here so anyone with a 3D printer can make a set, though I've licensed the design for noncommercial use - that means if you want to sell them you need to talk to me first. I'm open for Parf, Qwas, Woodpeckers to make me an offer I can't refuse [big grin]. The dogs fit quite snugly so there's no slop and they don't move around at all when tightened. I printed them with an unusually high infill (85%) so they're effectively solid plastic. You could probably break them, but you're going to have to work at it. The only additional hardware that's needed is a pair of M6x25 hex bolts and nuts for each clamp and you'll want a pair of clamps. A drop of epoxy to fasten the head of the vertical bolt in the top section and the nut in the bottom section would make them less fiddly to install. For now this design is done, I'm happy with it.
[attachimg=1]
mattbyington said:FYI to all I received mine and like them a lot. I feel a lot more confident that the fence isn't moving when I knock it. Would buy again. Shipping was good to and I got mine in the US (shipped from UK).
Matt
rj_mccall said:Hey Matt, could you point me in the direction of where to order these from?? Thanks!!
GoingMyWay said:rj_mccall said:Hey Matt, could you point me in the direction of where to order these from?? Thanks!!
He ordered them from:https://benchdogs.co.uk/ (I also ordered a set).